MAX5095AAUA+T
| Parameters | |
|---|---|
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX5095 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 7.6V~30V |
| Control Features | Frequency Control |
| Topology | Flyback, Forward Converter |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 20kHz~1MHz |
| Input Voltage (Max) | 25V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 15ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 22 ns |
| Switcher Configuration | SINGLE |
| Max Frequency | 1MHz |
| Max Duty Cycle | 97.5 % |
| Duty Cycle (Max) | 96% |
| Clock Sync | Yes |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Additional Feature | IT CAN ALSO OPERATE WITH CURRENT MODE |
MAX5095AAUA+T Overview
It comes in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, which makes switching controller suitable for most applications. It is sufficient to generate 1 outputs with this dc motor controller. PMIC packaging is solid with a Tape & Reel (TR) enclosure. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThe supply and operating voltage of the dc control are 7.6V~30V. Qualified to work in a -40°C~125°C TJ dc switcher. Using this switching controller, it is possible to switch at 20kHz~1MHz. As it has a Surface Mount value, it can be used for general dc dc regulator. For efficient switching control, the dcdc regulator features Frequency Control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. There are a terminal (s) on the switching converters that are designed at DUAL. A variety of dc switching's functions can be performed on 8 terminations. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's input voltageis 15V volts. Other relevant dc to dc converter ics can be found by searching "MAX5095". In total, switching converter has 8 pins. In particular, switching converter belongs to the Switching Regulator or Controllers family. Voltages 25V are the maximum that the dc to dc regulator will accept. In most cases, the output current of the dc dc regulator will be 1A, so note that when you start the project. A duty cycle set at 97.5 % ensures voltage regulator dc to dc reliability during power-on and power-off. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. There is a maximum frequency of 1MHz on this dc regulators. As a result, DC to DC voltage regulator has a value of IT CAN ALSO OPERATE WITH CURRENT MODE so that the need can be met more directly.
MAX5095AAUA+T Features
Transistor Driver Outputs
Switching Frequency: 20kHz~1MHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 97.5 %
IT CAN ALSO OPERATE WITH CURRENT MODE
MAX5095AAUA+T Applications
There are a lot of Maxim Integrated MAX5095AAUA+T DC to DC converter applications.
- Surface processing equipment
- Servo drive system
- Handheld GPS
- Balance equipment
- Constant current circuits
- Electrical power transmission
- Smoke exhaust equipment
- Elevator lighting
- Computer rooms
- Shearing machines
