MAX5095BAUA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | IT CAN ALSO OPERATE WITH CURRENT MODE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX5095 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 7.6V~30V |
| Control Features | Frequency Control |
| Topology | Flyback, Forward Converter |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 10kHz~500kHz |
| Input Voltage (Max) | 25V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 15ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 22 ns |
| Switcher Configuration | SINGLE |
| Max Frequency | 1MHz |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 49.8% |
| Clock Sync | Yes |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX5095BAUA+ Overview
The switching controller fits in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package and is ideal for most applications. For 1 outputs, the dc motor controller is appropriate. There is a Tube solid enclosure around the pmic. There are Transistor Driver dc switching's output (s) that it can handle. 7.6V~30V is the operating voltage and supply voltage of the dc control. Qualified to work in a -40°C~125°C TJ dc switcher. There is a switch at 10kHz~500kHz that can be used with this controller. As it has a Surface Mount value, it can be used for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Frequency Control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. An array of 8 terminations of dc switching. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. It is inputted with a DC switcher's voltage of 15V. Other relevant dc to dc converter ics will be returned if you search "MAX5095". 8 pins are on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. It should be noted that the dc to dc regulator only accepts 25V voltage as input voltage. If you start a project, note down the dc dc regulator's usual output current of 1A. A duty cycle set at 50 % ensures voltage regulator dc to dc reliability during power-on and power-off. DC switcher's Surface Mount qualifies it for most applications and prototypes. It is estimated that this dc regulatorhas a maximum frequency of 1MHz. The value of DC to DC voltage regulator is set at IT CAN ALSO OPERATE WITH CURRENT MODE in order to fulfill the requirements more effectively.
MAX5095BAUA+ Features
Transistor Driver Outputs
Switching Frequency: 10kHz~500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
IT CAN ALSO OPERATE WITH CURRENT MODE
MAX5095BAUA+ Applications
There are a lot of Maxim Integrated MAX5095BAUA+ DC to DC converter applications.
- Scientific testing
- Wind power
- Gear/thread machining machines
- Solar power plants
- Adjustable voltage or current linear circuits
- seismic instrument power circuits
- Remotely powered electric motors
- Mobile phones
- Drilling machines
- Smoke exhaust equipment
