MAX5095BAUA-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Additional Feature | IT CAN ALSO OPERATE WITH CURRENT MODE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX5095 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 7.6V~30V |
| Control Features | Frequency Control |
| Topology | Flyback, Forward Converter |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 10kHz~500kHz |
| Input Voltage (Max) | 25V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 15ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 22 ns |
| Switcher Configuration | SINGLE |
| Max Frequency | 1MHz |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 49.8% |
| Clock Sync | Yes |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX5095BAUA-T Overview
As a result of 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) compact design, the switching controller is compatible with most applications. This dc motor controller can be used to generate outputs with 1 numbers. Tape & Reel (TR) solid enclosure protects the pmic. It is capable of handling Transistor Driver dc switching's outputs (s). 7.6V~30V is the supply voltage and the operating voltage of the dc control. Worked in an dc switcher with a -40°C~125°C TJ rating. The switching controller is capable of switching at the 10kHz~500kHz position. The Surface Mount value makes it suitable for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Frequency Control. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. Terminal (s) of the switching converters are designed at the DUAL position. The 8 terminations can be used for a wide range of dc switching. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's voltage input is 15V. Other relevant dc to dc converter ics can be found by searching "MAX5095". 8 pins are on switching converter. Switching converter is a special type of Switching Regulator or Controllers. It should be noted that the dc to dc regulator only accepts 25V voltage as input voltage. In most cases, the output current of the dc dc regulator will be 1A, so note that when you start the project. The maximum duty cycle of this voltage regulator dc to dc is set to 50 % to ensure reliability during power-up and power-down. The Surface Mount makes DC switcher suitable for most applications and prototypes. DC regulators have a maximum frequency of 1MHz. As a result, DC to DC voltage regulator has a value of IT CAN ALSO OPERATE WITH CURRENT MODE so that the need can be met more directly.
MAX5095BAUA-T Features
Transistor Driver Outputs
Switching Frequency: 10kHz~500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
IT CAN ALSO OPERATE WITH CURRENT MODE
MAX5095BAUA-T Applications
There are a lot of Maxim Integrated MAX5095BAUA-T DC to DC converter applications.
- Hydrogen power
- Thermal power
- Special machining machine tools
- Ball screw pair
- Energy management systems
- Smart grid
- PSRR circuits
- Digital display device
- Remotely powered electric motors
- Telecommunications equipment
