MAX5095CAUA-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Additional Feature | IT CAN ALSO OPERATE WITH CURRENT MODE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX5095 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 7.6V~30V |
| Control Features | Frequency Control |
| Topology | Flyback, Forward Converter |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 10kHz~500kHz |
| Input Voltage (Max) | 25V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 15ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 22 ns |
| Switcher Configuration | SINGLE |
| Max Frequency | 1MHz |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 49.8% |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX5095CAUA-T Overview
With its 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, the switching controller fits the needs of most applications. 1 outputs can be generated with the dc motor controller. The pmic is packaged in Tape & Reel (TR) solid enclosure. A total of Transistor Driver dc switching's outputs can be handled by it. dc control's supply and operating voltages are 7.6V~30V. Suitable for a -40°C~125°C TJ dc switcher. Switching can be done at 10kHz~500kHz with this switching controller. dc dc regulator can be generalized using Surface Mount. To ensure efficient switching, this dcdc regulator features a Frequency Control. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . A variety of terminations with 8 of dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 15V. You can find other relevant dc to dc converter ics by searching "MAX5095". There are 8 pins on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. This dc to dc regulator accepts only 25V input voltage at most. A starting point for a project is to note down the dc dc regulator's usual output current, which is 1A. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 50 %. The Surface Mount makes DC switcher suitable for most applications and prototypes. DC regulators have a maximum frequency of 1MHz. The value of DC to DC voltage regulator is set to IT CAN ALSO OPERATE WITH CURRENT MODE in order to better satisfy the requirement.
MAX5095CAUA-T Features
Transistor Driver Outputs
Switching Frequency: 10kHz~500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
IT CAN ALSO OPERATE WITH CURRENT MODE
MAX5095CAUA-T Applications
There are a lot of Maxim Integrated MAX5095CAUA-T DC to DC converter applications.
- Geothermal power
- Laboratories
- Experimental setup
- Gear/thread machining machines
- Computed tomography (CT)
- Textile machinery
- Precision electronic equipment
- Fire elevators
- Domestic water pumps
- Various CNC machine tools
