Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
24-SOIC (0.295, 7.50mm Width) |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Published |
2003 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
24 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Comparator |
Max Power Dissipation |
650mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
4.75V |
Terminal Pitch |
1.27mm |
Base Part Number |
MAX516 |
Pin Count |
24 |
Output Type |
CMOS, TTL |
Number of Elements |
4 |
Power Supplies |
5/15V |
Nominal Supply Current |
10mA |
Max Supply Current |
10mA |
Propagation Delay |
1.5 μs |
Quiescent Current |
10mA |
Turn On Delay Time |
800 ns |
Response Time |
800 ns |
Voltage - Supply, Single/Dual (±) |
4.75V~16.5V |
Supply Voltage Limit-Max |
17V |
Input Bias Current |
300nA |
Input Offset Voltage-Max |
10000μV |
Current - Input Bias (Max) |
0.3μA @ 16.5V |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
MAX516AEWG+T Overview
For convenience, it is packaged in 24-SOIC (0.295, 7.50mm Width) .The comparator has a CMOS, TTL output.We ship the part through Tape & Reel (TR) .There are 24 terminals on the comparator.The electrical component in this case belongs to the Comparator family.With a voltage of 4.75V supplied, the comparator is capable of performing a wide range of demanding tasks.Electronic comparator is possible to classify the chip as General Purpose .This is a 4 element comparator.Electronic comparator has 24 pins.In general, mounting type Surface Mount is recommended.A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.You can find more pin-to-pin solutions for your special requirements by searching MAX516 .A quiescent current of 10mA is displayed by this comparator.Electronic comparator has a Surface Mount for mounting on PCB or other boards.Normal use of the device should require a nominal supply current of 10mA .A current supply greater than 10mA may result in the comparator malfunctioning.This device requires 5/15V power supplies to operate.
MAX516AEWG+T Features
CMOS, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 10mA
MAX516AEWG+T Applications
There are a lot of Maxim Integrated MAX516AEWG+T linear comparators applications.
- Battery-Powered Electronics
- Portable and Battery-Powered Systems
- DC/DC and AC/DC power supplies
- Motor drives
- Infotainment and Clusters
- Battery management and protection
- High-Speed Differential Line Receiver
- Appliances
- Automotive
- Analog front end