MAX516BCWG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Comparator |
| Max Power Dissipation | 650mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 4 |
| Supply Voltage | 4.75V |
| Terminal Pitch | 1.27mm |
| Base Part Number | MAX516 |
| Pin Count | 24 |
| Output Type | CMOS, TTL |
| Number of Elements | 4 |
| Power Supplies | 5/15V |
| Nominal Supply Current | 10mA |
| Max Supply Current | 10mA |
| Propagation Delay | 1.5 μs |
| Quiescent Current | 10mA |
| Response Time | 800 ns |
| Voltage - Supply, Single/Dual (±) | 4.75V~16.5V |
| Supply Voltage Limit-Max | 17V |
| Max Input Current | 300nA |
| Input Bias Current | 300nA |
| Input Offset Voltage-Max | 15000μV |
| Current - Input Bias (Max) | 0.3μA @ 16.5V |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX516BCWG Overview
For convenience, it is packaged in 24-SOIC (0.295, 7.50mm Width) .There is a comparator of type CMOS, TTL output on this device.We ship the part through Tube .24 terminals are found on the comparator.The component belongs to the Comparator family of electrical components.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 4.75V .In general, the chip type can be classified as General Purpose .A total of 4 elements can be found in it.There are 24 pins on this board.A Surface Mount mounting type is recommended.In order to avoid malfunctions, the operating temperature should be set to 0°C~70°C .You can search MAX516 if you are looking for more pin-to-pin solutions.There is 10mA current flowing in this comparator.Mounting on PCBs or other boards is easy with the Surface Mount .Normally, the nominal supply current should be 10mA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 10mA .The device can be powered by 5/15V power supplies.Electronic comparator is possible to input a maximum of 300nA current into the device.
MAX516BCWG Features
CMOS, TTL output capability
General Purpose IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 10mA
MAX516BCWG Applications
There are a lot of Maxim Integrated MAX516BCWG linear comparators applications.
- DC/DC and AC/DC power supplies
- Wearable Devices
- Wireless Base Stations
- Set Top Boxes
- Portable Battery Monitoring
- Power management
- Current and voltage sensing
- Hand-Held Electronics
- Industrial
- Analog front end
