MAX5916AEUI+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 28-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Feature | Auto Retry, Fault Timeout, Thermal Limit, UVLO |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller |
| Terminal Finish | MATTE TIN |
| Applications | PCI |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Voltage - Supply | 10.8V~13.2V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX5916 |
| Pin Count | 28 |
| JESD-30 Code | R-PDSO-G28 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 13.2V |
| Power Supplies | +-12V |
| Supply Voltage-Min (Vsup) | 10.8V |
| Number of Channels | 5 |
| Current - Output (Max) | 205mA 1A |
| Adjustable Threshold | YES |
| Current - Supply | 2.5mA |
| Neg Supply Voltage-Nom (Vsup) | -12V |
| Internal Switch(s) | Both |
| Programmable Features | Circuit Breaker, Current Limit |
| Feature Pins | AUXONA, AUXONB, ONA, ONB, PGOODA, PGOODB |
| Height Seated (Max) | 1.1mm |
| Length | 9.7mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
MAX5916AEUI+ Overview
This is included in the 28-TSSOP (0.173, 4.40mm Width) package.As of now, 5 channels are available.It's packaged in a Tube shape.The 28 terminations total to three.Device position DUAL is its terminal position.Hot-swappable device has a total of 28 pins on Hot-swappable device.High efficiency is possible at a voltage of 12V.In the way of Surface Mount, it's set up.This electrical component is classified as Hot Swap Controller.If you want reliable performance, you should set the temperature to -40°C~85°C.PCI applications are available on the device.The article appears in Auto Retry, Fault Timeout, Thermal Limit, UVLO.The device should be able to be powered by a 10.8V~13.2VV power source.There are numbers in the MAX5916 family that include it.There is nothing else in Power Management Circuits but this gadget.Circuit Breaker, Current Limit is its programmable feature.This is the current supply of 2.5mA.Normally, Vsup should remain above 10.8V.The maximum supply voltage is set to 13.2V.Part +-12V is associated with power supplies.205mA 1AV is the device's maximum output.
MAX5916AEUI+ Features
The terminal position of 28
Features of Auto Retry, Fault Timeout, Thermal Limit, UVLO
Programmable features of Circuit Breaker, Current Limit
MAX5916AEUI+ Applications
There are a lot of Maxim Integrated MAX5916AEUI+ hot swap controllers applications.
- Base station
- Electric vehicle
- Hard drive
- Thermal limitation
- Redundant negative voltage supplies
- Inrush current control
- Central office switching systems
- Disconnect faulty loads before supply voltage drops
- Reverse current protection
- Avionics systems
