banner_page

MAX5929BEEG+

Tube Obsolete 4 Surface Mount Hot Swap Controllers 2.5mA mA Fault Timeout, Latched Fault 24-SSOP (0.154, 3.90mm Width) 4 General Purpose Hot Swap Controller, Sequencer


  • Manufacturer: Rochester Electronics, LLC
  • Nocochips NO: 699-MAX5929BEEG+
  • Package: 24-SSOP (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 556
  • Description: Tube Obsolete 4 Surface Mount Hot Swap Controllers 2.5mA mA Fault Timeout, Latched Fault 24-SSOP (0.154, 3.90mm Width) 4 General Purpose Hot Swap Controller, Sequencer (Kg)

Details

Tags

Parameters
Mounting Type Surface Mount
Package / Case 24-SSOP (0.154, 3.90mm Width)
Surface Mount YES
Operating Temperature -40°C~85°C
Packaging Tube
Series VariableSpeed/BiLevel™
Feature Fault Timeout, Latched Fault
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 24
Type Hot Swap Controller, Sequencer
Applications General Purpose
Technology BICMOS
Voltage - Supply 1V~15V
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.635mm
Pin Count 24
Supply Voltage-Max (Vsup) 15V
Supply Voltage-Min (Vsup) 1V
Number of Channels 4
Adjustable Threshold NO
Current - Supply 2.5mA
Internal Switch(s) No
Programmable Features Circuit Breaker, Current Limit, UVLO
Feature Pins BIAS, IN1, IN2, IN3, IN4, MODE, ON1, ON2, ON3, ON4, STAT1, STAT2, STAT3, STAT4
Height Seated (Max) 1.75mm
Length 8.65mm
Width 3.9mm
RoHS Status ROHS3 Compliant

MAX5929BEEG+ Overview


You can find it in the 24-SSOP (0.154, 3.90mm Width) package.At the moment, there are 4 channels available.Tube-shaped packaging is used.24 terminations are present in total.A device's terminal position is DUAL.The device has a total of 24 pins.With a supply voltage of 3.3V, high efficiency is possible.This is set up in the same way as Surface Mount.Hot-swappable device is classified as a Hot Swap Controller, Sequencer electrical component.A temperature setting of -40°C~85°C will ensure reliable operation.Application General Purpose is available on the device.The article appears in Fault Timeout, Latched Fault.In the case of a 1V~15VV power source, it should work just fine.Its programmable features are Circuit Breaker, Current Limit, UVLO.Hot-swappable device is estimated that there is a current supply of 2.5mA.Normally, Vsup should remain above 1V.Vsup is set to 15V, the maximum supply voltage.VariableSpeed/BiLevel? series components are used in this electrical component.

MAX5929BEEG+ Features


The terminal position of 24
Features of Fault Timeout, Latched Fault
Programmable features of Circuit Breaker, Current Limit, UVLO
VariableSpeed/BiLevel? series

MAX5929BEEG+ Applications


There are a lot of Rochester Electronics, LLC MAX5929BEEG+ hot swap controllers applications.

  • Redundant-array-of-independent-disk (RAID) storage
  • Current monitoring
  • Circuit breakers for electronic circuits
  • Automatic restart after load failure
  • Short-circuit protection in real time
  • Storage network
  • Disconnect faulty loads before supply voltage drops
  • Circuit power protectors
  • Board or blade insertion into live backplanes
  • Telecommunications

Write a review

Note: HTML is not translated!
    Bad           Good