banner_page

MAX5948AESA+

Tube Obsolete 1 Surface Mount Hot Swap Controllers 8-SOIC (0.154, 3.90mm Width) 1 -48V Hot Swap Controller


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX5948AESA+
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 726
  • Description: Tube Obsolete 1 Surface Mount Hot Swap Controllers 8-SOIC (0.154, 3.90mm Width) 1 -48V Hot Swap Controller (Kg)

Details

Tags

Parameters
Number of Channels 1
Nominal Supply Current 700μA
Power Dissipation 471mW
Adjustable Threshold YES
Supply Current-Max (Isup) 2mA
Nominal Input Voltage 80V
Internal Switch(s) No
Programmable Features Auto Retry, Fault Timeout, Latched Fault, OVP, UVLO
Feature Pins DRAIN, /PWRGD, OV, UV
Length 4.9mm
Width 3.9mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature -40°C~85°C
Packaging Tube
Published 2001
JESD-609 Code e3
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Hot Swap Controller
Terminal Finish MATTE TIN
Applications -48V
Subcategory Power Management Circuits
Technology BICMOS
Voltage - Supply -80V~-20V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 48V
Base Part Number MAX5948
Pin Count 8
Output Voltage 110mV
Supply Voltage-Min (Vsup) 20V

MAX5948AESA+ Overview


Package 8-SOIC (0.154, 3.90mm Width) includes it.Currently, there are 1 channels accessible.Tube-shaped packaging is used for this product.There are a total of 8 terminations on it.Device DUAL is in the terminal position.There are a total of 8 pins on it.High efficiency can be achieved by using 48V as supply voltage.There is a Surface Mount-like arrangement.Electric components of this type are classified as Hot Swap Controller.If you want reliable performance, you should set the temperature to -40°C~85°C.Apps for -48V are available on the device.With a -80V~-20VV power source, it should work.The MAX5948 family includes it.Hot-swappable device is necessary to use 8 pins in order to operate the device.There is nothing else in Power Management Circuits but this gadget.Auto Retry, Fault Timeout, Latched Fault, OVP, UVLO features are programmable.Positioned in direction of Surface Mount, it is at a right angle.For normal operation, the supply voltage (Vsup) should be kept above 20V in order to maintain a constant level of power.The maximum supply current for operation is 2mA.110mV output voltages are capable of high efficiency.

MAX5948AESA+ Features


The terminal position of 8
Programmable features of Auto Retry, Fault Timeout, Latched Fault, OVP, UVLO
Output voltage of 110mV

MAX5948AESA+ Applications


There are a lot of Maxim Integrated MAX5948AESA+ hot swap controllers applications.

  • Datacom
  • Reverse current protection
  • Circuit breakers for high-side circuits
  • Power monitoring
  • Solid state circuit breakers
  • Load transient protection
  • Overcurrent protection
  • Short circuit protection
  • Data communication systems
  • Current monitoring

Write a review

Note: HTML is not translated!
    Bad           Good