MAX5951ETJ+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX5951 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 16V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.5V~16V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Output Current-Max | 2A |
| Frequency - Switching | 100kHz~1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1MHz |
| Duty Cycle (Max) | 88% |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
MAX5951ETJ+T Overview
Capsuled in the 32-WFQFN Exposed Pad package, the switching controller can be used for a wide range of applications. For 1 outputs, the dc motor controller is appropriate. The pmic is packaged in Tape & Reel (TR) solid enclosure. Transistor Driver dc switching's outputs (s) can be handled by it. Voltages 4.5V~16V are the dc control's supply voltage and operating voltage, respectively. Qualified to work in an dc switcher with -40°C~85°C TA. The switching controller is capable of switching at the 100kHz~1MHz position. dc dc regulator is made easier with Surface Mount. Current Limit, Enable, Frequency Control, Power Good is used for efficient switching control in the dcdc regulator. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. The switching converters's terminals (s) are designed at QUAD. 32 terminations with various dc switching's functions. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 5V. MAX5951 can be searched for other relevant dc to dc converter ics. There are 32 pins on switching converter. Switching converter is a special type of Switching Regulator or Controllers. It is recommended that the dc dc voltage regulator's minimum input voltage be 4.5V. DC regulator outputs 5.5V voltage according to the test statistics. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sIt is estimated that this dc regulatorhas a maximum frequency of 1MHz. In order for the voltage regulator dc to dc to perform safely and reliably in a circuit, users are advised to apply 16V. A value of 2A is output as the maximum value of current.
MAX5951ETJ+T Features
Transistor Driver Outputs
Switching Frequency: 100kHz~1MHz
Current Limit, Enable, Frequency Control, Power Good
PULSE WIDTH MODULATION
MAX5951ETJ+T Applications
There are a lot of Maxim Integrated MAX5951ETJ+T DC to DC converter applications.
- Shearing machines
- Hydraulic presses
- Magnetohydrodynamic power
- Computer monitoring equipment of building
- Product testing
- Various precision measuring detectors
- Industrial controllers
- Electrical distribution systems
- Packaging
- Precision electronic equipment
