MAX5954AETX+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-WFQFN Exposed Pad |
| Number of Pins | 36 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Feature | Auto Retry, OVP, SMBus, Thermal Limit, UVLO |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 36 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Hot Plug Controller |
| Applications | PCI Express® |
| Additional Feature | ALSO REQUIRES 12V SUPPLY |
| Technology | BICMOS |
| Voltage - Supply | 3V~3.6V 10.8V~13.2V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX5954 |
| Pin Count | 36 |
| Qualification Status | Not Qualified |
| Output Voltage | 700mV |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 3 |
| Nominal Supply Current | 5.5A |
| Power Dissipation | 2.105W |
| Adjustable Threshold | NO |
| Nominal Input Voltage | 13.2V |
| Internal Switch(s) | Both |
| Programmable Features | Current Limit, Fault Timeout |
| Feature Pins | AUXON, /FAULT, /FON, ON, /PRES-DET, /PWRGD |
| Height Seated (Max) | 0.8mm |
| Length | 6mm |
| Width | 6mm |
| RoHS Status | ROHS3 Compliant |
MAX5954AETX+ Overview
The 36-WFQFN Exposed Pad package includes it.3 channels are currently available.It's?packaged?in?the?form?of?a?Tube.There are a total of 36 terminations on it.In this case, the device is located at terminal QUAD.In total, there are 36 pins on it.An efficient supply voltage is possible with 3.3V.This is set up in the same way as Surface Mount.This electrical component belongs to the Hot Plug Controller classification.The temperature should be set to -40°C~85°C to ensure reliable functioning.There are PCI Express? applications on the device.A feature of Auto Retry, OVP, SMBus, Thermal Limit, UVLO describes it.The device should be able to be powered by a 3V~3.6V 10.8V~13.2VV power source.In the MAX5954 family, it appears as a number.A 36 pin is used for operation.There are Current Limit, Fault Timeout programmable features on this device.There is a Surface Mount-axis orientation to it.For normal operation, Vsup should be maintained above 3V.Through the use of this device, ALSO REQUIRES 12V SUPPLY can also be produced.In the case of a 700mV output voltage, high efficiency can be achieved.
MAX5954AETX+ Features
The terminal position of 36
Features of Auto Retry, OVP, SMBus, Thermal Limit, UVLO
Programmable features of Current Limit, Fault Timeout
Output voltage of 700mV
MAX5954AETX+ Applications
There are a lot of Maxim Integrated MAX5954AETX+ hot swap controllers applications.
- High power circuit board
- Temperature monitor output
- Power monitoring
- Undervoltage protection
- Circuit power protectors
- Networking
- Safe board insertion and extraction
- Network router
- Current monitoring
- Telecommunications
