MAX5957AETN+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-WFQFN Exposed Pad |
| Number of Pins | 56 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Feature | Auto Retry, SMBus, Thermal Limit, UVLO |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | Hot Plug Controller |
| Terminal Finish | TIN |
| Applications | PCI Express® |
| HTS Code | 8542.31.00.01 |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 3.2W |
| Technology | BICMOS |
| Voltage - Supply | 3V~3.6V 10.8V~13.2V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX5957 |
| Pin Count | 56 |
| Qualification Status | Not Qualified |
| Output Voltage | 800mV |
| Operating Supply Voltage | 3.3V |
| Power Supplies | 3.312V |
| Supply Voltage-Min (Vsup) | 10.8V |
| Number of Channels | 9 |
| Operating Supply Current | 1mA |
| Adjustable Threshold | YES |
| Nominal Input Voltage | 13.2V |
| Internal Switch(s) | Both |
| Programmable Features | Current Limit, Fault Timeout |
| Height Seated (Max) | 0.8mm |
| Length | 7mm |
| Width | 7mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
MAX5957AETN+ Overview
As part of the 56-WFQFN Exposed Pad package, it is included.Hot-swappable device is currently possible to access 9 channels.Tube-shaped packaging is used for this product.The terminations total 56.In this case, the device is located at terminal QUAD.The device has a total of 56 pins.High efficiency can be achieved by using 12V as supply voltage.Surface Mount sets it up.Electrical components classified as Hot Plug Controller are referred to as Hot Plug Controller components.The temperature should be set to -40°C~85°C to ensure reliable functioning.The device has PCI Express? applicationsThe article is featured in Auto Retry, SMBus, Thermal Limit, UVLO.Hot-swappable device should work if you use a 3V~3.6V 10.8V~13.2VV power source.The number MAX5957 belongs to the MAX5957 family.In order to operate, 56 pins are used.As far as Power Management Circuits is concerned, this gadget is self-contained.The programmable features of this device are Current Limit, Fault Timeout.There is a Surface Mount-axis orientation to it.For normal operation, Vsup should be maintained above 10.8V.The power supplies of the part is 3.312V.Hot Swap is 1mA that operates the supply current.When the output voltage is 800mV, high efficiency is possible.
MAX5957AETN+ Features
The terminal position of 56
Features of Auto Retry, SMBus, Thermal Limit, UVLO
Programmable features of Current Limit, Fault Timeout
Output voltage of 800mV
MAX5957AETN+ Applications
There are a lot of Maxim Integrated MAX5957AETN+ hot swap controllers applications.
- Solid state circuit breakers
- Raid
- Temperature monitor output
- Inrush current control
- Base station
- Short circuit protection
- Storage network
- Current limit and current foldback limit functions
- Limitting the inrush current
- Remote access server
