MAX5960AECS+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 80-TQFP |
| Number of Pins | 80 |
| Weight | 513.60831mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| Published | 2007 |
| JESD-609 Code | e3 |
| Feature | Auto Retry, SMBus, Thermal Limit, UVLO |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Type | Hot Plug Controller |
| Terminal Finish | Matte Tin (Sn) |
| Applications | PCI Express® |
| HTS Code | 8542.31.00.01 |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 1.86W |
| Technology | BICMOS |
| Voltage - Supply | 3V~3.6V 10.8V~13.2V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX5960 |
| Pin Count | 80 |
| Qualification Status | Not Qualified |
| Output Voltage | 100mV |
| Supply Voltage-Max (Vsup) | 13.2V |
| Supply Voltage-Min (Vsup) | 10.8V |
| Number of Channels | 12 |
| Operating Supply Current | 1mA |
| Adjustable Threshold | YES |
| Supply Current-Max (Isup) | 2.5mA |
| Nominal Input Voltage | 12V |
| Internal Switch(s) | Both |
| Programmable Features | Current Limit, Fault Timeout |
| Height Seated (Max) | 1.2mm |
| RoHS Status | ROHS3 Compliant |
MAX5960AECS+ Overview
You get it with the 80-TQFP package.At present, 12 channels are available.Tray-shaped packaging is used.In total, it has 80 terminations.There is a QUAD terminal position on the device.80 pins make up the entire device.High efficiency is possible at a voltage of 12V.According to Surface Mount, it has been set up.Electric components of this type are classified as Hot Plug Controller.If you want reliable performance, you should set the temperature to -40°C~85°C.PCI Express? applications are available on the device.Hot-swappable device is featured in Auto Retry, SMBus, Thermal Limit, UVLO.With a 3V~3.6V 10.8V~13.2VV power source, it should work.There are numbers in the MAX5960 family that include it.In order to operate, 80 pins are used.Power Management Circuits contains this gadget all by itself.Among its programmable features are Current Limit, Fault Timeout.Positioned in direction of Surface Mount, it is at a right angle.Hot-swappable device is recommended to keep the supply voltage (Vsup) above 10.8V so that the device can function normally.13.2V is set for Vsup (maximum supply voltage).The maximum operating current is 2.5mA.Hot Swap is 1mA that operates the supply current.High efficiency is feasible with a 100mV output voltage.
MAX5960AECS+ Features
The terminal position of 80
Features of Auto Retry, SMBus, Thermal Limit, UVLO
Programmable features of Current Limit, Fault Timeout
Output voltage of 100mV
MAX5960AECS+ Applications
There are a lot of Maxim Integrated MAX5960AECS+ hot swap controllers applications.
- Networking
- PC board hot swap insertion and removal
- Overvoltage protection
- Disconnect faulty loads before supply voltage drops
- Identify faulty boards
- Central office switching systems
- Datacom
- Safe board insertion and extraction
- Load transient protection
- Avionics systems
