MAX5974BETE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Terminal Pitch | 0.5mm |
| Frequency | 600kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX5974 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 21V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 1.8mA |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 8.4V~26V |
| Control Features | Dead Time Control, Enable, Frequency Control, Soft Start |
| Topology | Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz~600kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 27ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 14 ns |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 82 % |
| Duty Cycle (Max) | 80% |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
MAX5974BETE+T Overview
It comes in a 16-WFQFN Exposed Pad package, so switching controller can be used for most applications. The dc motor controller is adquate to generate for 1 outputs. PMIC is packaged in a solid enclosure of Tape & Reel (TR). There are Transistor Driver dc switching's output (s) that it can handle. DC control operates at 8.4V~26V volts and has 8.4V~26V supply voltage. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. In this switching controller, the switch can be set to 100kHz~600kHz. The Surface Mount makes it ideal for general dc dc regulator. Featured in the dcdc regulator is Dead Time Control, Enable, Frequency Control, Soft Start which allows efficient switching control. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. The switching converters's terminal (s) are designed at QUAD . A variety of 16 terminations are available in dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. DC switcher's input voltageis set to 12V. You can find other relevant dc to dc converter ics by searching "MAX5974". The switching converter has a total of 16 pins. In particular, switching converter belongs to the Switching Regulator or Controllers family. If you start a project, note down the dc dc regulator's usual output current of 1A. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 82 % during power-up and power-down. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. A frequency of 600kHz is used by the switching controller. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 21V. The supply current is 1.8mA.
MAX5974BETE+T Features
Transistor Driver Outputs
Switching Frequency: 100kHz~600kHz
Dead Time Control, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 82 %
Frequency: 600kHz
MAX5974BETE+T Applications
There are a lot of Maxim Integrated MAX5974BETE+T DC to DC converter applications.
- Packaging
- Photovoltaic power
- Constant current circuits
- Driver circuits
- Linear guide
- CNC system
- Elevator lighting
- Scientific testing
- Hydrogen power
- Pipe bending machines
