MAX5974DETE+
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO HAS CONTROL MODE OF IPK |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX5974 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 21V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 1.8mA |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 8.4V~26V |
| Control Features | Dead Time Control, Enable, Frequency Control, Soft Start |
| Topology | Flyback, Forward Converter |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 100kHz~600kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 27ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 14 ns |
| Switcher Configuration | SINGLE |
| Max Frequency | 600kHz |
| Max Duty Cycle | 82 % |
| Isolation | Non-Isolated |
| Duty Cycle (Max) | 80% |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX5974DETE+ Overview
This switching controller fits most application requirements since it is packaged in a 16-WFQFN Exposed Pad package. This dc motor controller can be used to generate outputs with 1 numbers. Packaged in solid enclosures, this pmic has a Tube rating. A total of Transistor Driver dc switching's outputs can be handled by it. This dc control operates at 8.4V~26V and has a 8.4V~26V supply voltage. A -40°C~85°C TA dc switcher is not a problem. There is a switch at 100kHz~600kHz that can be used with this controller. It is suitable for general dc dc regulator when it is set to Surface Mount. The dcdc regulator features Dead Time Control, Enable, Frequency Control, Soft Start for efficient switching control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. The switching converters's terminal (s) are designed at QUAD . Various 16 terminations. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 12V. You can find other relevant dc to dc converter ics by searching "MAX5974". There are a total of 16 pins on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. You should note down the dc dc regulator's usual output current of 1A when you start a project. It is set to 82 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. There is a maximum frequency of 600kHz on this dc regulators. For better satisfaction, the value of DC to DC voltage regulator is ALSO HAS CONTROL MODE OF IPK. For safe and reliable operation in a circuit, voltage regulator dc to dc is suggested that users apply 21V. A supply current of 1.8mA is used to power it.
MAX5974DETE+ Features
Transistor Driver Outputs
Switching Frequency: 100kHz~600kHz
Dead Time Control, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 82 %
ALSO HAS CONTROL MODE OF IPK
MAX5974DETE+ Applications
There are a lot of Maxim Integrated MAX5974DETE+ DC to DC converter applications.
- Planers
- Serial communication converter
- Computer application technology
- Fire elevators
- Flaw detection equipment
- Series voltage regulation circuits
- Cutting machine tools
- Computer-related products
- Smoke prevention equipment
- Domestic water pumps
