MAX5974DETE+G3U
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Supplier Device Package | 16-TQFN (3x3) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2015 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 8.85V |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 8.4V~26V |
| Control Features | Dead Time Control, Enable, Frequency Control, Soft Start |
| Topology | Flyback, Forward Converter |
| Frequency - Switching | 100kHz~600kHz |
| Rise Time | 27ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 14 ns |
| Max Duty Cycle | 80 % |
| Duty Cycle (Max) | 80% |
| Clock Sync | Yes |
| Output Phases | 1 |
| Number of Output Phases | 1 |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX5974DETE+G3U Overview
With a 16-WFQFN Exposed Pad package, the switching controller is suitable for a wide range of applications. 1 outputs can be generated with the dc motor controller. Tube is the solid enclosure in which PMIC is packaged. Transistor Driver dc switching's outputs (s) are supported. dc controls with 8.4V~26V voltage are supplied and operated. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. With this switching controller, you can switch at 100kHz~600kHz. Surface Mount makes it suitable for general dc dc regulator. To provide efficient switching control, Dead Time Control, Enable, Frequency Control, Soft Start is included in the dcdc regulator. You should note that the dc dc regulator's usual output current is 1A. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 80 %. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 8.85V. A temperature of -40°C or higher is recommended. At a temperature around 85°C degrees Celsius, dc regulator should be running. A supplier dc dc controller package of 16-TQFN (3x3) would be used for this part. Switches with 1 phases are used in this controller.
MAX5974DETE+G3U Features
Transistor Driver Outputs
Switching Frequency: 100kHz~600kHz
Dead Time Control, Enable, Frequency Control, Soft Start
Max Duty Cycle: 80 %
MAX5974DETE+G3U Applications
There are a lot of Maxim Integrated MAX5974DETE+G3U DC to DC converter applications.
- Wind power
- Large fire protection systems
- Surge protection circuits
- Injection molding machinery
- Series voltage regulation circuits
- Fire elevators
- Arc suppression circuits
- Cutting machine tools
- Industrial controllers
- Handheld GPS
