MAX5974DETE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Terminal Pitch | 0.5mm |
| Frequency | 600kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX5974 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 21V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 1.8mA |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 8.4V~26V |
| Control Features | Dead Time Control, Enable, Frequency Control, Soft Start |
| Topology | Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz~600kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 27ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 14 ns |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 82 % |
| Duty Cycle (Max) | 80% |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
MAX5974DETE+T Overview
Capsuled in the 16-WFQFN Exposed Pad package, the switching controller suits most application needs. There is enough capacity in the dc motor controller to generate the output for the 1 input. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. It is capable of handling Transistor Driver dc switching's outputs (s). A 8.4V~26V voltage is supplied to the dc control and used for operating it. Suitable for working in an dc switcher that has a -40°C~85°C TA. With this switching controller, you can switch at 100kHz~600kHz. dc dc regulator can be generalized using Surface Mount. To provide efficient switching control, Dead Time Control, Enable, Frequency Control, Soft Start is included in the dcdc regulator. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. The switching converters's terminals (s) are designed at QUAD. The 16 terminations can be used for a wide range of dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's voltage input is 12V. MAX5974 can be searched for other relevant dc to dc converter ics. Pins number 16 of switching converter in total. Specially, switching converter corresponds to type Switching Regulator or Controllers. The dc dc regulator's usual output current is 1A, which should be noted down when you start a project. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 82 %. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. Switching controller operates at 600kHz Hz. A circuit should contain 21V in order to ensure the voltage regulator dc to dc runs safely and reliably. It runs on a 1.8mA supply current.
MAX5974DETE+T Features
Transistor Driver Outputs
Switching Frequency: 100kHz~600kHz
Dead Time Control, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 82 %
Frequency: 600kHz
MAX5974DETE+T Applications
There are a lot of Maxim Integrated MAX5974DETE+T DC to DC converter applications.
- Shearing machines
- Medical monitoring systems
- Alternators
- Emergency lighting monitoring equipment
- Planers
- Computer-related products
- Game consoles
- Digital display device
- Imported equipment
- Scientific testing
