MAX5986BETE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2015 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Controller (PD), DC/DC |
| Additional Feature | OUTPUT IN ADJUSTABLE MODE IS 5.4V TO 5.6V |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Voltage - Supply | 8.7V~60V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 48V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX5986 |
| Qualification Status | Not Qualified |
| Output Voltage | 14V |
| Input Voltage-Nom | 48V |
| Power Supplies | 48V |
| Number of Channels | 1 |
| Nominal Supply Current | 4.5mA |
| Output Current | 12.6mA |
| Power - Max | 6.49W |
| Current - Supply | 3.6mA |
| Min Input Voltage | 8.7V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 60V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | BUCK |
| Internal Switch(s) | Yes |
| Standards | 802.3af (PoE) |
| Switching Frequency | 275kHz |
| RoHS Status | ROHS3 Compliant |
MAX5986BETE+ Overview
It is included in the Tube package.It is packaged in a way that resembles 16-WQFN Exposed Pad.An PoE controller of this type is Controller (PD), DC/DC.The number of channels is growing strong/weak: 1.Reliability is ensured by operating PoE at -40°C~85°C.A 8.7V~60V voltage is used to supply power to this electrical Po E controller.According to the base part number MAX5986, its Po E controllers can be founded.It is possible to terminate a transmission line with a 16 termination by connecting a power over ethernet controller with a matching impedance to the transmission line.This electrical ethernet over power controller has a maximum power of 6.49W Watts, which is the maximum power it can deliver.Supply current is equal to 3.6mA.The Po E controller in question is included in the package Power Management Circuits.The 16 pins are designed into it.During the reflow process of this electrical ethernet power controller, Cel (peak reflow temperature) reaches NOT SPECIFIED.If the supply voltage is greater than 48V, then the supply should be higher.In this case, it is mounted in the direction of Surface Mount.Power is provided by 48V power supplies for the operation of the PoE ethernet controller.The output current of 12.6mA makes it feature maximum design flexibility.The OUTPUT IN ADJUSTABLE MODE IS 5.4V TO 5.6V parameter also plays a role in it.As a result of this power over ethernet controller's output voltage being 14V, this voltage is the output voltage.In this power over ethernet PoE controller, 60V is the maximal input voltage that it can accept.The minimal input voltage of this power over the ethernet controller is 8.7V.
MAX5986BETE+ Features
Tube package
16 pins
48V power supplies
The output current of 12.6mA
MAX5986BETE+ Applications
There are a lot of Maxim Integrated MAX5986BETE+ Power Over Ethernet (PoE) Controllers applications.
- Non-Compliant, Application Specific Devices
- WLAN Access Points
- Power Modules
- PoE powered device appliances
- VoIP Phones
- High Power Wireless Data Systems
- High Temperature Industrial Applications
- Lighting
- Single-Port PSE Power Injectors
- Commercial Information Displays
