MAX608ESA
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 186.993455mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Base Part Number | MAX608 |
| Function | Step-Up |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Max Output Current | 1A |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | 1.8V~16.5V |
| Output Power | 10W |
| Control Features | Enable |
| Max Output Voltage | 16.5V |
| Topology | Boost |
| Min Input Voltage | 1.8V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 300kHz |
| Max Input Voltage | 16.5V |
| Control Technique | PULSE FREQUENCY MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 3V |
| Switcher Configuration | SINGLE |
| Max Frequency | 300kHz |
| Duty Cycle | 85 % |
| Height | 1.25mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX608ESA Overview
The switching controller fits in the 8-SOIC (0.154, 3.90mm Width) package and is ideal for most applications. This dc motor controller can be used to generate outputs with 1 numbers. Tube is the solid enclosure in which PMIC is packaged. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control has a supply voltage and operating voltage of 1.8V~16.5V. Worked in an dc switcher with a -40°C~85°C TA rating. The switching controller can be switched at Up to 300kHz. The Surface Mount value makes it suitable for general dc dc regulator. Enable provides dcdc regulator efficient switching control. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. A variety of 8 terminations are available in dc switching. Some of the control techniques used by these dc dc converter ics are PULSE FREQUENCY MODULATION. Other relevant dc to dc converter ics will be returned if you search "MAX608". 8 pins are on switching converter. A 5V voltage of DC regulator was detected in the test statistics. The dc dc regulator's usual output current is 1.5A, which should be noted down when you start a project. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sThere is a maximum frequency of 300kHz for this dc regulators. In order to ensure the dc switcher's functionality, users must limit the voltage to 16.5V due to the dc switcher's maximum input voltage. 1.8V is the required supply voltage. There will be 1A current output from the dc switcher above 1A. Depending on the datasheet, the switching converter can output 16.5V volts at its peak. Neither the voltage controller's lowest voltage output 3Vr its highest voltage output is less than 3V.
MAX608ESA Features
Transistor Driver Outputs
Switching Frequency: Up to 300kHz
Enable
PULSE FREQUENCY MODULATION
MAX608ESA Applications
There are a lot of Maxim Integrated MAX608ESA DC to DC converter applications.
- Industrial controllers
- Medical monitoring systems
- ATMs
- Arc suppression circuits
- Smart grid
- Terrestrial set-top boxes
- Current source circuits
- Die casting equipment
- Electric water heaters
- Radio equipment
