MAX626EPA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Base Part Number | MAX626 |
| Pin Count | 8 |
| Max Output Current | 2A |
| Nominal Supply Current | 8mA |
| Max Supply Current | 8mA |
| Input Type | Inverting |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 25ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.06 μs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.04 μs |
| Length | 9.375mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX626EPA+ Overview
Its 8-DIP (0.300, 7.62mm) package is adopted for higher flexibility.A package of Tube has been used.Gate drivers incorporates wGate driversh 2 drivers for Gate driverss configuration.There is a mounting bracket in the way of Through Hole.In the absence of a 4.5V~18V supply voltage, it can demonstrate its superiority.Gate drivers is designed wGate driversh a N-Channel, P-Channel MOSFET gate.This device allows temperatures in the range of -40°C~85°C TA.This program uses the input type of Inverting.Its configuration is based on a total of 8 terminations.Numerous related parts can be found under its base part number MAX626.The mount method is Through Hole.Mosfet driver is configured wMosfet driverh 8 pins when designing.In this case, BUFFER OR INVERTER BASED MOSFET DRIVER serves as the interface IC.The maximum output current can amount to 2A.Its subcategory of MOSFET Drivers contains various useful electronic components.The board has 8 component pins.Its maximum power dissipation of 500mW shows its power loss capacity without overheating.Mosfet gate drivers is recommended that you keep the supply current at 8mA in order to achieve greater stabilMosfet gate driversy.
MAX626EPA+ Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 500mW
MAX626EPA+ Applications
There are a lot of Maxim Integrated MAX626EPA+ gate drivers applications.
- Industrial Motor Inverter - Power Tools, Robotics
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Smart Phones
- Broadcast equipment
- AC-DC Inverters
- Industrial Modules
- serial peripheral interface (SPI), I2C
- Uninterruptible Power Supplies (UPS)
- Line drivers
- Power factor correction (PFC) circuits
