MAX626ESA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 450mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Base Part Number | MAX626 |
| Pin Count | 8 |
| Output Voltage | 25V |
| Max Output Current | 2A |
| Nominal Supply Current | 8mA |
| Output Current | 2A |
| Max Supply Current | 8mA |
| Input Type | Inverting |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 25ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.06 µs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.04 µs |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX626ESA+ Overview
For greater flexibility, the 8-SOIC (0.154, 3.90mm Width) package is adopted.The packaging method is indicated by Tube.For its configuration, it incorporates 2 drivers.Surface Mount is the way in which it is mounted.In the absence of a 4.5V~18V supply voltage, its superiority can be demonstrated.Gate type N-Channel, P-Channel MOSFET has been used in its design.This device can operate at temperatures up to -40°C~85°C TA.This program uses the input type of Inverting.The configuration is based on 8 terminations.There are various parts that can be found under its base part number MAX626.The device is mounted using Surface Mount.Mosfet driver is configured wMosfet driverh 8 pins when designing.Its interface IC is BUFFER OR INVERTER BASED MOSFET DRIVER.There is an output current limit of 2A for this device.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.The number of component pins is 8.The output current supported by the device is 2A.The maximum power dissipation of 450mW shows its maximum capability to transfer and conduct power loss without overheating.The supply current should be kept at 8mA to ensure higher stability.When this voltage is produced, it is marked as 25V.
MAX626ESA+ Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 450mW
MAX626ESA+ Applications
There are a lot of Maxim Integrated MAX626ESA+ gate drivers applications.
- Motor Controls
- Isolated Supplies for controller area network (CAN),
- Commercial and agricultural vehicles (CAV)
- Automotive Applications
- Industrial Modules
- Welding
- Dual-Battery Systems
- 3-Phase Motor Inverter Driver
- Isolated switch mode power supplies (SMPS)
- Motor Control
