MAX626ESA+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 450mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Base Part Number | MAX626 |
| Pin Count | 8 |
| Max Output Current | 2A |
| Nominal Supply Current | 8mA |
| Max Supply Current | 8mA |
| Input Type | Inverting |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 25ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.06 μs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.04 μs |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX626ESA+T Overview
Its 8-SOIC (0.154, 3.90mm Width) package provides greater flexibility.A packaging method of Tape & Reel (TR) is indicated.This device is equipped with 2 drivers for its configuration.In this case, gate drivers is mounted along the way of Surface Mount.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 4.5V~18V.Gate type N-Channel, P-Channel MOSFET has been used in its design.There is a temperature range for this device of -40°C~85°C TA.Inverting is used as its input type.The configuration starts with 8 terminations.There are numerous related parts listed under its base part number MAX626.Surface Mount is the way it takes to mount the device.As a result, it is configured with 8 pins when it is designed.Mosfet driver utilizes the interface IC BUFFER OR INVERTER BASED MOSFET DRIVER.There is an output current limit of 2A for this device.There are several useful electronic components found in its subcategory of MOSFET Drivers.8 pins are present on the component.The maximum power dissipation of 450mW shows its maximum capability to transfer and conduct power loss without overheating.Keeping the supply current at 8mA ensures greater stability.
MAX626ESA+T Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 450mW
MAX626ESA+T Applications
There are a lot of Maxim Integrated MAX626ESA+T gate drivers applications.
- serial peripheral interface (SPI), I2C
- Industrial motor drives - compact, standard, premium, servo drives
- AC-DC Inverters
- High-speed communications
- Power factor correction (PFC) circuits
- Dual-Battery Systems
- Video amplifiers
- Topologies
- Commercial and agricultural vehicles (CAV)
- Head-up and Head mounted displays
