MAX627CPA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Base Part Number | MAX627 |
| Pin Count | 8 |
| Output Voltage | 25V |
| Max Output Current | 2A |
| Nominal Supply Current | 8mA |
| Output Current | 2A |
| Max Supply Current | 8mA |
| Input Type | Non-Inverting |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 25ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.06 µs |
| Input Current | 1μA |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.04 µs |
| Height | 4.45mm |
| Length | 9.91mm |
| Width | 7.87mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX627CPA+ Overview
Gate drivers provides greater flexibilGate driversy to use the 8-DIP (0.300, 7.62mm) package.A package of Tube has been used.This configuration includes 2 drivers.In this case, gate drivers is mounted along the way of Through Hole.In the absence of a power supply voltage of 4.5V~18V V, it is able to demonstrate its superiority.Gate drivers is designed wGate driversh a N-Channel, P-Channel MOSFET gate.There is a temperature range for this device of 0°C~70°C TA.This program uses the input type of Non-Inverting.Its configuration starts with 8 terminations.Mosfet driver is possible to find various related parts under Mosfet drivers base part number MAX627.The mount method is Through Hole.When designing, the device is configured with 8 pins.BUFFER OR INVERTER BASED MOSFET DRIVER is employed as its interface IC.Mosfet driver is possible for the output current to be as low as 2A.This subcategory of MOSFET Drivers has a number of useful electronic components.The component has 8 pins.The output current supported by the device is 2A.Based on the maximum power dissipation of 500mW, it is clear that it is capable of transferring and conducting power losses without becoming overheated.The supply current should be kept at 8mA to ensure higher stability.25V is the output voltage.
MAX627CPA+ Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 500mW
MAX627CPA+ Applications
There are a lot of Maxim Integrated MAX627CPA+ gate drivers applications.
- Power factor correction (PFC) circuits
- Commercial air-conditioning (CAC)
- Portable Navigation Devices
- Digitally controlled power supplies
- Isolated switch mode power supplies (SMPS)
- LCD/LCoS/DLP portable and embedded pico projectors
- DC-DC Converters
- PCMCIA applications
- Isolated Gate Driver Supplies
- High-voltage isolated DC-DC converters
