MAX627CSA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 450mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Base Part Number | MAX627 |
| Pin Count | 8 |
| Max Output Current | 2A |
| Nominal Supply Current | 8mA |
| Max Supply Current | 8mA |
| Input Type | Non-Inverting |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 25ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.06 µs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.04 µs |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX627CSA+T Overview
Its 8-SOIC (0.154, 3.90mm Width) package is adopted for higher flexibility.Tape & Reel (TR) represents the packaging method.Gate drivers incorporates wGate driversh 2 drivers for Gate driverss configuration.Surface Mount is mounted in the way of the device.When the supply voltage is set to 4.5V~18V, it can demonstrate its superiority.A gate type of N-Channel, P-Channel MOSFET has been used in its design.For this device, the temperature range is 0°C~70°C TA.The input type for this program is Non-Inverting.As a result of its configuration, it contains a maximum of 8 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number MAX627.In this case, Surface Mount indicates how the device is mounted.During design, it is configured with 8 pins.There is an interface IC called BUFFER OR INVERTER BASED MOSFET DRIVER that is employed in this device.As a maximum, there is 2A limit to the output current.There are several useful electronic components in this subcategory of MOSFET Drivers.The number of component pins is 8.Considering its maximum power dissipation, 450mW shows its maximum capacity to transfer and conduct power loss without overheating.To ensure high stability, the supply current should be kept at 8mA.
MAX627CSA+T Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 450mW
MAX627CSA+T Applications
There are a lot of Maxim Integrated MAX627CSA+T gate drivers applications.
- General Purpose 3-Phase Inverter
- Head-up and Head mounted displays
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Industrial Motor Inverter - Power Tools, Robotics
- Isolated Supplies for controller area network (CAN),
- White Goods - Air Conditioner, Washing Machine,
- Solar power supplies
- AC-DC Inverters
- High current laser/LED systems
