MAX627ESA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 450mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Base Part Number | MAX627 |
| Pin Count | 8 |
| Output Voltage | 25V |
| Max Output Current | 2A |
| Nominal Supply Current | 8mA |
| Output Current | 2A |
| Max Supply Current | 8mA |
| Input Type | Non-Inverting |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 25ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.06 μs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.04 μs |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX627ESA+ Overview
There is greater flexibility with the 8-SOIC (0.154, 3.90mm Width) package.A packaging method of Tube is indicated.For its configuration, it incorporates 2 drivers.Surface Mount is mounted in the way.In the absence of a 4.5V~18V supply voltage, it can demonstrate its superiority.This device is designed with a N-Channel, P-Channel MOSFET gate type.This device allows temperatures in the range of -40°C~85°C TA.Mosfet driver uses Non-Inverting as Mosfet drivers input type.The configuration starts with 8 terminations.Mosfet driver is possible to find various related parts under Mosfet drivers base part number MAX627.The device is mounted using Surface Mount.When the device is designed, it has 8 pins.There is an interface IC called BUFFER OR INVERTER BASED MOSFET DRIVER that is employed in this device.Mosfet driver is possible for the output current to be as low as 2A.There are various useful electronic components in its subcategory MOSFET Drivers.The board has 8 component pins.The output current can be set to 2A.Considering its maximum power dissipation, 450mW shows its maximum capacity to transfer and conduct power loss without overheating.As a precaution, make sure the supply current is kept at 8mA.Mosfet gate drivers outputs 25V as voltage.
MAX627ESA+ Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 450mW
MAX627ESA+ Applications
There are a lot of Maxim Integrated MAX627ESA+ gate drivers applications.
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Portable computers
- Line drivers
- Digitally controlled power supplies
- AC-DC Inverters
- PCMCIA applications
- Smart Phones
- Motor Control
- Industrial Motor Inverter - Power Tools, Robotics
- LCD/LCoS/DLP portable and embedded pico projectors
