MAX627MJA/883B
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-CDIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | Military, MIL-STD-883 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 640mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 2 |
| Pin Count | 8 |
| Max Output Current | 2A |
| Voltage | 18V |
| Nominal Supply Current | 8mA |
| Max Supply Current | 8mA |
| Input Type | Non-Inverting |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 25ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.06 µs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.04 µs |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
MAX627MJA/883B Overview
For greater flexibility, its 8-CDIP (0.300, 7.62mm) package is used.A packaging method of Tube is used.Configuration is based on 2 drivers.Gate drivers is mounted in the way of Through Hole.By using 4.5V~18V supply voltage, it is able to demonstrate its superiority.A gate type of N-Channel, P-Channel MOSFET is used in its design.This device is allowed to operate in a temperature range of -55°C~125°C TA.A type of Non-Inverting is used for input in this program.Mosfet driver consists of 8 terminations as Mosfet drivers foundation.Mounting the device requires Through Hole.A total of 8 pins are available on the device.The interface IC is referred to as BUFFER OR INVERTER BASED MOSFET DRIVER.As a maximum, there is 2A limit to the output current.Several electronic components are included in its subcategory of MOSFET Drivers.On the board, there are 8 component pins.Its maximum power dissipation of 640mW also demonstrates its maximum ability to transfer power without overheating.Mosfet gate drivers is recommended that you keep the supply current at 8mA in order to achieve greater stabilMosfet gate driversy.The gate driver is part of the Military, MIL-STD-883 series.
MAX627MJA/883B Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 640mW
Operating with the supply voltage of Military, MIL-STD-883
MAX627MJA/883B Applications
There are a lot of Maxim Integrated MAX627MJA/883B gate drivers applications.
- Dual-Battery Systems
- Active Clamp Flyback or Forward and Synchronous Rectifier
- High-voltage isolated DC-DC converters
- Welding
- Motor Control
- DC/DC converters
- Power factor correction (PFC) circuits
- Industrial motor drives - compact, standard, premium, servo drives
- Refrigerator
- Automotive Applications
