MAX628CPA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Base Part Number | MAX628 |
| Pin Count | 8 |
| Output Voltage | 25V |
| Max Output Current | 2A |
| Nominal Supply Current | 8mA |
| Output Current | 2A |
| Max Supply Current | 8mA |
| Input Type | Inverting, Non-Inverting |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 25ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.06 μs |
| Input Current | 1μA |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.04 μs |
| Length | 9.375mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX628CPA+ Overview
For greater flexibility, its 8-DIP (0.300, 7.62mm) package is used.Gate drivers is packaged in the way of Tube.The configuration is supported by 2 drivers.Through Hole is mounted in the way.In the absence of a 4.5V~18V supply voltage, its superiority can be demonstrated.Gate type N-Channel, P-Channel MOSFET has been used in its design.For this device, the temperature range is 0°C~70°C TA.The input type for this program is Inverting, Non-Inverting.Initially, the configuration is composed of 8 terminations.Numerous related parts can be found under its base part number MAX628.Mounting the device requires Through Hole.In the device, there are 8 pins.The interface IC of the device is BUFFER OR INVERTER BASED MOSFET DRIVER.An output current as high as 2A can be achieved at maximum power.This subcategory of MOSFET Drivers has a number of useful electronic components.A total of 8 pins are available for component connections.2A is the maximum output current supported by the device.This device has a maximum power dissipation of 500mW, indicating that it is capable of reducing power loss without overheating.In order to ensure greater stability, it is recommended to keep the supply current at 8mA.25V is the output voltage.
MAX628CPA+ Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 500mW
MAX628CPA+ Applications
There are a lot of Maxim Integrated MAX628CPA+ gate drivers applications.
- Industrial Motor Inverter - Power Tools, Robotics
- Motor Drives
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- A/D drivers
- Commercial and agricultural vehicles (CAV)
- UPS systems
- Head-up and Head mounted displays
- Isolated Supplies for Motor Control
- Dual-Battery Systems
- PCMCIA applications
