MAX628ESA
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 450mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Base Part Number | MAX628 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Max Output Current | 2A |
| Power Supplies | 4.5/18V |
| Nominal Supply Current | 8mA |
| Max Supply Current | 8mA |
| Input Type | Inverting, Non-Inverting |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 25ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.06 µs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.04 µs |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX628ESA Overview
For greater flexibility, the 8-SOIC (0.154, 3.90mm Width) package is adopted.Tube represents the packaging method.Configuration is supported by 2 drivers.Its recommended mounting way is Surface Mount.In the absence of a 4.5V~18V supply voltage, its superiority can be demonstrated.A gate type of N-Channel, P-Channel MOSFET has been used in its design.This device allows temperatures in the range of -40°C~85°C TA.This program uses the input type of Inverting, Non-Inverting.Its configuration is based on a total of 8 terminations.There are various parts that can be found under its base part number MAX628.The mount method is Surface Mount.As its interface IC, BUFFER OR INVERTER BASED MOSFET DRIVER is being employed.2A is the maximum output current.There are several useful electronic components found in its subcategory of MOSFET Drivers.On the board, there are 8 component pins.According to its maximum power dissipation, 450mW is capable of conducting and transferring a large amount of power without overheating.As a precaution, make sure the supply current is kept at 8mA.With its power supplies of 4.5/18V, it solves the power supply problems for diverse applications.
MAX628ESA Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
Maximum power dissipation of 450mW
MAX628ESA Applications
There are a lot of Maxim Integrated MAX628ESA gate drivers applications.
- Industrial Motor Inverter - Power Tools, Robotics
- Digitally controlled power supplies
- AC-DC Inverters
- Uninterruptible Power Supplies (UPS)
- Portable Media Players
- High frequency line drivers
- Telecom switch mode power supplies
- serial peripheral interface (SPI), I2C
- Pulse transformer drivers
- Smart Phones
