MAX6301CPA
| Parameters | |
|---|---|
| Number of Channels | 1 |
| Adjustable Threshold | YES |
| Reset | Active Low |
| Voltage - Threshold | Adjustable/Selectable |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 2.8ms Minimum |
| Supply Current-Max (Isup) | 0.007mA |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Additional Feature | ADJUSTABLE WATCHDOG TIMEOUT, OPEN-DRAIN OUTPUT |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX6301 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 1V |
MAX6301CPA Overview
There are 8 terminals on this power management that allow it to be mounted. Packaged in the form of a Tube, power management is easy to use. The purpose of this IC management is to provide you with a reference of 1 functions. It is possible to find on this power management a series of 1 channels. The purpose of this IC power is to provide you with a reference of 8-DIP (0.300, 7.62mm) functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. As specified in the package specification, the peak reflow temperature of the package is set at 245. IC management conducts in a 5V-voltage supply. IC management conducts in a 1-voltage supply. Power Management Circuits is a subcategory of this PMIC chip. It has a total of 8 pins that are attached to IC management. A Through Hole mounting type is recommended. The supervisors should be set to the following temperature: 0°C~70°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. In addition, IC management are other features such as [0], to mention only a few. A similar IC managements number of the manufacturer can always be found by using MAX6301, the base power ics number. This power management requires 2/5.5V power to work.
MAX6301CPA Features
Simple Reset/Power-On Reset type
MAX6301CPA Applications
There are a lot of Maxim Integrated MAX6301CPA Voltage Supervisors applications.
- Detection of phase imbalance
- emergency room
- Set top box
- Sensitive sensors
- Digitally controlled LDO regulators circuit
- Consumer electronics
- WiFi router
- Network equipment
- Important electronics for automotive safety
- Fire equipment power monitoring system
