MAX6302CUA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ADJUSTABLE WATCHDOG TIMEOUT, OPEN-DRAIN OUTPUT |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 330mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX6302 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.31V |
| Operating Supply Current | 4μA |
| Adjustable Threshold | YES |
| Watchdog Timer | Yes |
| Reset | Active High |
| Voltage - Threshold | Adjustable/Selectable |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 2.8ms Minimum |
| Supply Current-Max (Isup) | 0.007mA |
| Reset Delay Time | 5.2 ms |
| Height | 950μm |
| Length | 3.05mm |
| Width | 3.05mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX6302CUA+ Overview
A total of 8 terminals are used to mount this power management. Tube-packaging is used. In this PMIC, you can find 1 functions for your reference. This power management is made up of 1 channels which are available in a series format. In this IC management you will find 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) functions for you to refer to. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 260. IC management conducts at a voltage of 5V. IC management is possible to find a succession of 1 voltages that have been checked. The power management is mounted by a Surface Mount-axis. There is a subcategory of this power ic known as Power Management Circuits. In total, IC powers are 8 pins on the board. There are 8 pins on the supervisor. It is recommended that Vsup should not be less than 1.31V for this IC power. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. In this case, Surface Mount is the recommended mounting type. It is recommended that the supervisor be set to this temperature: 0°C~70°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. The power management's supply current is 4μA. There are other features such as ADJUSTABLE WATCHDOG TIMEOUT, OPEN-DRAIN OUTPUT to name a few. A similar IC managements number of the manufacturer can always be found by using MAX6302, the base power ics number.
MAX6302CUA+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.31V
4μA operating supply current
MAX6302CUA+ Applications
There are a lot of Maxim Integrated MAX6302CUA+ Voltage Supervisors applications.
- DC stabilized power supply module
- Radio
- Battery-powered equipment
- Automotive power systems
- Electronics installed in the vehicle
- Power distribution systems of operating room
- Medical-specific isolation transformer
- Detection of phase imbalance
- Important electronics for automotive protection
- Smart meter
