MAX6303CUA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ADJUSTABLE WATCHDOG TIMEOUT, PUSH/PULL OR OPEN-DRAIN OUTPUT OPTIONS |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 330mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX6303 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 4μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | Adjustable/Selectable |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 2.8ms Minimum |
| Supply Current-Max (Isup) | 0.007mA |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6303CUA+T Overview
This power management consists of 8 mounting terminals on which it can be mounted. Packaging is in the form of a Tape & Reel (TR). For your reference, this IC power includes a list of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. IC management is packaged as a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. Specifies a reflow peak temperature of 260 for the package during reflow. When a supply voltage of 5V is applied to the power ic, it conducts. A supply voltage of 1 is used to conduct the PMIC chip. The power management is mounted by a Surface Mount-axis. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. Power management has a total of 8 pins. There are 8 pins on the supervisor. IC management can only work with a supply voltage of 1V volts. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Mounting type Surface Mount is recommended. Temperature setting for the supervisors should be 0°C~70°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. The supply current of the power management is 4μA. There are other features such as ADJUSTABLE WATCHDOG TIMEOUT, PUSH/PULL OR OPEN-DRAIN OUTPUT OPTIONS to name a few. You can always use MAX6303, the base supervisor number, to search for similar PMICs of the manufacturer.
MAX6303CUA+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
4μA operating supply current
MAX6303CUA+T Applications
There are a lot of Maxim Integrated MAX6303CUA+T Voltage Supervisors applications.
- Data storage applications
- Multi-voltage system
- Solar power charger
- Detection of phase imbalance
- Functional modules
- Smart meter
- Power distribution systems of infant care room
- Transformer load monitoring equipment
- Embedded computing
- Unattended substation automation
