MAX6304CUA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ADJUSTABLE WATCHDOG TIMEOUT, PUSH/PULL OR OPEN-DRAIN OUTPUT OPTIONS |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 330mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX6304 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.31V |
| Operating Supply Current | 4μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High |
| Voltage - Threshold | Adjustable/Selectable |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 2.8ms Minimum |
| Supply Current-Max (Isup) | 0.007mA |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX6304CUA+T Overview
This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. Packaged in the form of a Tape & Reel (TR), power management is easy to use. There are 1 functions included in this PMIC so that you can refer to them. There are a total of 1 channels on this supervisor, and they are arranged in a series. IC management is packaged as a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. The package peak reflow temperature is specified to be 260. Manage ics operate at 5V supply voltages. During operation, the power ic is supplied with a voltage of 1. The mount is provided by Surface Mount. A IC power such as this can be classified as a Power Management Circuits power management system. It has a total of 8 pins that are attached to IC management. This power management has 8 pins. IC management can only work with a supply voltage of 1.31V volts. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The mounting type of the supervisors is Surface MountTemperature setting for the supervisors should be 0°C~70°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. There is a 4μA supply current present in the power management. There are also other features in the software such as [0], just to mention a few. A similar IC managements number of the manufacturer can always be found by using MAX6304, the base power ics number.
MAX6304CUA+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.31V
4μA operating supply current
MAX6304CUA+T Applications
There are a lot of Maxim Integrated MAX6304CUA+T Voltage Supervisors applications.
- Display equipment
- Insulation fault location system
- Battery cars
- FPGA design
- Stable power system
- Telecommunications equipment
- Digitally controlled LDO regulators circuit
- Power distribution systems of operating room
- Military electronics
- Leakage current detection
