MAX6320PUK42CW+
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Strip |
| Published | 2015 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 4.2 V |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 571mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Output | Open Drain or Open Collector |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 4.2V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.02mA |
| Min Reset Threshold Voltage | 4.137V |
| Max Reset Threshold Voltage | 4.263V |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX6320PUK42CW+ Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. Packaging is in the form of a Strip. The purpose of this IC management is to provide you with a reference of 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. IC management is packaged as a SC-74A, SOT-753 package. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. In a 3.6V supply voltage, the power management conducts. Power management conducts at a voltage of 1. Surface Mount mounts IC management. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. 5 pins are on the supervisor. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Mounting type Surface Mount is recommended. You should set the supervisor's temperature during -40°C~125°C TA . While this power management is operating, it will output Open Drain or Open Collector as the output voltage. There are also other features in the software such as [0], just to mention a few.
MAX6320PUK42CW+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
MAX6320PUK42CW+ Applications
There are a lot of Maxim Integrated MAX6320PUK42CW+ Voltage Supervisors applications.
- DC stabilized power supply module
- DVR
- Military communications
- emergency room
- Power distribution systems of operating room
- FPGA design
- Leakage current detection
- Radar
- Important electronics for automotive protection
- Transformer load monitoring equipment
