MAX6324GUT29+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Strip |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Watchdog Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 696mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.95mm |
| Output | Open Drain or Open Collector |
| Pin Count | 6 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 27μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 2.93V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 100ms Minimum |
| Supply Current-Max (Isup) | 0.057mA |
| Min Reset Threshold Voltage | 2.85V |
| Max Reset Threshold Voltage | 3V |
| Undervoltage Threshold | 2.85V |
| Overvoltage Threshold | 3V |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6324GUT29+T Overview
Power management is mounted through 6 terminals. A Strip package is used to package the power management. There are 1 functions included in this PMIC so that you can refer to them. There are a total of 1 channels on this supervisor, and they are arranged in a series. Please find attached SOT-23-6 functions for your reference in this IC power. This IC power shares lots of benefits with other Watchdog Circuit products. The package peak reflow temperature is specified to be 260. In a 3V supply voltage, the power management conducts. When 1 is applied to the power ic, it conducts. The mount is provided by Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. A total of 6 pins are located on this power management. This power management system has 6 pins. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.2V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. The recommended mounting type is Surface Mount. It is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. The supervisor's supply current is specified to 27μA.
MAX6324GUT29+T Features
Watchdog Circuit type
Minimum supply voltage of 1.2V
27μA operating supply current
MAX6324GUT29+T Applications
There are a lot of Maxim Integrated MAX6324GUT29+T Voltage Supervisors applications.
- Electrical fire monitoring system
- Rechargeable batteries
- Magnetic resonance imaging
- Kitchen appliances
- Unattended substation automation
- Low voltage/high power - AI, GPU
- Battery cars
- Consumer electronics
- DC stabilized power supply module
- Utility meter
