banner_page

MAX6327UR23+T

3V3 Terminals 3-Pin MAX6327 Voltage supervisor1 Channels Min 1.2V Max 5.5V


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX6327UR23+T
  • Package: TO-236-3, SC-59, SOT-23-3
  • Datasheet: PDF
  • Stock: 307
  • Description: 3V3 Terminals 3-Pin MAX6327 Voltage supervisor1 Channels Min 1.2V Max 5.5V (Kg)

Details

Tags

Parameters
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 3
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Terminal Finish Matte Tin (Sn)
Subcategory Power Management Circuits
Max Power Dissipation 320mW
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3V
Terminal Pitch 0.95mm
Base Part Number MAX6327
Output Push-Pull, Totem Pole
Pin Count 3
Number of Channels 1
Max Supply Voltage 5.5V
Min Supply Voltage 1.2V
Operating Supply Current 500nA
Adjustable Threshold NO
Watchdog Timer No
Reset Active High
Voltage - Threshold 2.32V
Number of Voltages Monitored 1
Reset Timeout 100ms Minimum
Min Reset Threshold Voltage 2.285V
Max Reset Threshold Voltage 2.355V
Threshold Voltage +2.32V
Undervoltage Threshold 2.285V
Overvoltage Threshold 2.355V
Length 2.92mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case TO-236-3, SC-59, SOT-23-3
Number of Pins 3
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Published 2006
JESD-609 Code e3
Pbfree Code yes
Part Status Active

MAX6327UR23+T Overview


A total of 3 terminals are used to mount this power management. Power management is packaged in a Tape & Reel (TR) way. Power management is possible to find a series of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. In this PMIC, you can find TO-236-3, SC-59, SOT-23-3 functions for your reference. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 3V volt supply. IC management is possible to find a succession of 1 voltages that have been checked. The mount is provided by Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. Power management has a total of 3 pins. This power management has 3 pins. A voltage (Vsup) that doesn't fall below 1.2V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The recommended mounting type for IC management is Surface Mount. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. For this power management, there is an 500nA volt supply current. A similar IC managements number of the manufacturer can always be found by using MAX6327, the base power ics number.

MAX6327UR23+T Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
500nA operating supply current

MAX6327UR23+T Applications


There are a lot of Maxim Integrated MAX6327UR23+T Voltage Supervisors applications.

  • Embedded computing
  • Telecommunications equipment
  • Efficient information transmission
  • Display equipment
  • Precision measurement
  • Detection of phase sequence
  • Household appliances
  • Military communications
  • Automotive power systems
  • Fire equipment power monitoring system

Write a review

Note: HTML is not translated!
    Bad           Good