MAX6328XR22+T
| Parameters | |
|---|---|
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX6328 |
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 500nA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.2V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 100ms Minimum |
| Min Reset Threshold Voltage | 2.167V |
| Max Reset Threshold Voltage | 2.233V |
| Threshold Voltage | +2.2V |
| Undervoltage Threshold | 2.167V |
| Overvoltage Threshold | 2.233V |
| Length | 2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-70, SOT-323 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 174mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
MAX6328XR22+T Overview
There are 3 mounting terminals on the voltage supervisor, each of which has a different function. There is a Tape & Reel (TR)-packaging method applied to IC management. To assist you, this IC power includes 1 functions. A series of 1 channels can be found on this supervisor. The purpose of this IC power is to provide you with a reference of SC-70, SOT-323 functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. Specifies a reflow peak temperature of 260 for the package during reflow. A supply voltage of 3V is used to conduct the PMIC chip. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Surface Mount mounts power management on the wall. A IC power such as this can be classified as a Power Management Circuits power management system. Taking into account all of the pins, this power management has a total of 3. 3 pins are on the supervisor. A voltage (Vsup) that doesn't fall below 1.2V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The recommended mounting type for IC management is Surface Mount. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. Power management has an output of Open Drain or Open Collector during operation. Supplied with a operating current of 500nA, this PMIC is capable of fully function as specified. A similar IC managements number of the manufacturer can always be found by using MAX6328, the base power ics number.
MAX6328XR22+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
500nA operating supply current
MAX6328XR22+T Applications
There are a lot of Maxim Integrated MAX6328XR22+T Voltage Supervisors applications.
- Analog circuit
- Important electronics for automotive safety
- Leakage protection
- Power distribution systems of CCU
- WiFi router
- Battery cars
- Battery-powered equipment
- Low voltage/high power - AI, GPU
- Electric heating appliances
- Telecommunications equipment
