MAX6332UR20D3-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 2.0V |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 320mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.95mm |
| Base Part Number | MAX6332 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 700mV |
| Operating Supply Current | 3.3μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | 2V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 100ms Minimum |
| Supply Current-Max (Isup) | 0.007mA |
| Min Reset Threshold Voltage | 1.96V |
| Max Reset Threshold Voltage | 2.04V |
| Threshold Voltage | +2V |
| Undervoltage Threshold | 1.96V |
| Overvoltage Threshold | 2.04V |
| Length | 2.92mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX6332UR20D3-T Overview
This power management consists of 3 mounting terminals on which it can be mounted. Power management is packaged in a Tape & Reel (TR) way. In this PMIC, you can find 1 functions for your reference. It is possible to find on this power management a series of 1 channels. IC management is packaged as a TO-236-3, SC-59, SOT-23-3 package. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. IC management is specified that the package peak reflow temperature should be 260. In a 3V supply voltage, the power management conducts. IC management conducts in a 1-voltage supply. The power management is mounted by Surface Mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, IC powers are 3 pins on the board. This power management system has 3 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 700mV. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. In this case, Surface Mount is the recommended mounting type. This range of temperature should be set for the supervisors: -40°C~125°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 3.3μA. There are also other features in the software such as [0], just to mention a few. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6332, which is the base power ics number.
MAX6332UR20D3-T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
3.3μA operating supply current
MAX6332UR20D3-T Applications
There are a lot of Maxim Integrated MAX6332UR20D3-T Voltage Supervisors applications.
- Telecommunications equipment
- Detection of phase loss
- Detection of phase imbalance
- Military communications
- DVR
- Automotive power systems
- Computer applications
- Kitchen appliances
- Automotive permanent magnet synchronous motors
- Precision measurement
