MAX6337US16D2-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-253-4, TO-253AA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 320mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | MAX6337 |
| Output | Open Drain or Open Collector |
| Pin Count | 4 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 3.3μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 1.6V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 20ms Minimum |
| Supply Current-Max (Isup) | 0.007mA |
| Min Reset Threshold Voltage | 1.57V |
| Max Reset Threshold Voltage | 1.63V |
| Threshold Voltage | +1.6V |
| Undervoltage Threshold | 1.57V |
| Overvoltage Threshold | 1.63V |
| Length | 2.92mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX6337US16D2-T Overview
There are 4 terminals connected to this power management, which makes it easy to mount. Packaged in the form of a Tape & Reel (TR), power management is easy to use. The purpose of this IC management is to provide you with a reference of 1 functions. It is possible to find on this power management a series of 1 channels. There are TO-253-4, TO-253AA functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 245. IC management conducts in a 3V-voltage supply. IC management conducts in a 1-voltage supply. The power management is mounted by a Surface Mount-axis. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. Taking into account all of the pins, this power management has a total of 4. Power managment ic pin count is 4. A voltage (Vsup) that doesn't fall below 1.2V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type for IC management is Surface Mount. Temperature setting for the supervisors should be -40°C~125°C TA. During operation, this power management system outputs Open Drain or Open Collector. As far as the supply current of the power management is concerned, it is 3.3μA. It is always advisable to use MAX6337, the base supervisor number, when searching for similar PMICs from the manufacturer.
MAX6337US16D2-T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
3.3μA operating supply current
MAX6337US16D2-T Applications
There are a lot of Maxim Integrated MAX6337US16D2-T Voltage Supervisors applications.
- Household appliances
- Military electronics
- Medical-specific isolation transformer
- DC stabilized power supply module
- Important electronics for automotive safety
- Leakage protection
- Power distribution systems of operating room
- Rechargeable batteries
- Stable power system
- Military communications
