MAX6338CUB+T
| Parameters | |
|---|---|
| Min Supply Voltage | 2.5V |
| Operating Supply Current | 35μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 1.58V 2.93V 4.38V Adj |
| Number of Voltages Monitored | 4 |
| Reset Timeout | <1ms Minimum |
| Supply Current-Max (Isup) | 0.065mA |
| Undervoltage Threshold | 1.53V |
| Overvoltage Threshold | 1.62V |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 444mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX6338 |
| Output | Open Drain or Open Collector |
| Pin Count | 10 |
| Power Supplies | 3/5V |
| Number of Channels | 4 |
| Max Supply Voltage | 5.5V |
MAX6338CUB+T Overview
A total of 10 terminals are used to mount this power management. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. As a reference, this IC management includes 1 functions for your convenience. There are 4 channels on this power managment ic that can be found in a series. The purpose of this IC power is to provide you with a reference of 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) functions. It is a IC power that shares many benefits with other products from the Multi-Voltage Supervisor line. There is a specification for the peak reflow temperature of the package to be 260. When 3V is applied to the power ic, it conducts. Power management conducts at a voltage of 4. By Surface Mount, IC management has been mounted. Power Management Circuits is a subcategory of this PMIC chip. It has a total of 10 pins that are attached to IC management. 10 pins are on the supervisor. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 2.5V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Power management recommends the Surface Mount mounting type. Temperature setting for the supervisors should be -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. Supplied with a operating current of 35μA, this PMIC is capable of fully function as specified. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6338, which is the base power ics number. To operate this power management, you will need at least 3/5V volts of power.
MAX6338CUB+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2.5V
35μA operating supply current
MAX6338CUB+T Applications
There are a lot of Maxim Integrated MAX6338CUB+T Voltage Supervisors applications.
- Multi-voltage system
- Automotive permanent magnet synchronous motors
- Power distribution systems of operating room
- Microcontroller system
- emergency room
- Medical-specific insulation monitor
- Unattended substation automation
- Power communication system
- Smart meter
- Dash board
