MAX6338GUB+T
| Parameters | |
|---|---|
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 444mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX6338 |
| Output | Open Drain or Open Collector |
| Pin Count | 10 |
| Power Supplies | 3/5V |
| Number of Channels | 4 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.5V |
| Operating Supply Current | 35μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 1.58V 2.63V 4.38V Adj |
| Number of Voltages Monitored | 4 |
| Reset Timeout | <1ms Minimum |
| Supply Current-Max (Isup) | 0.065mA |
| Undervoltage Threshold | 1.53V |
| Overvoltage Threshold | 1.62V |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
MAX6338GUB+T Overview
There are 10 terminals on this power management that allow it to be mounted. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. To assist you, this IC power includes 1 functions. On this supervisor, there is a series of 4 channels that can be found. IC management is packaged as a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package. There are many benefits that this IC power shares with other Multi-Voltage Supervisor products as well. IC management is specified that the package peak reflow temperature should be 260. During operation, the power ic is supplied with a voltage of 3V. When 4 is applied to the power ic, it conducts. By Surface Mount, IC management has been mounted. A IC power such as this can be classified as a Power Management Circuits power management system. Taking into account all of the pins, this power management has a total of 10. This power management system has 10 pins. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 2.5V, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. A Surface Mount mounting type is recommended. You should set the supervisor's temperature during -40°C~85°C TA . During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. For this power management, there is an 35μA volt supply current. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6338, which is the base power ics number. To operate this power management, you will need at least 3/5V volts of power.
MAX6338GUB+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2.5V
35μA operating supply current
MAX6338GUB+T Applications
There are a lot of Maxim Integrated MAX6338GUB+T Voltage Supervisors applications.
- Medical-specific isolation transformer
- Important electronics for automotive safety
- Detection of phase imbalance
- Smart meter
- emergency room
- Embedded computing
- Electric heating appliances
- Low voltage/high power - AI, GPU
- Military communications
- External alarm
