MAX6338JUB
| Parameters | |
|---|---|
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | TIN LEAD |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 444mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX6338 |
| Output | Open Drain or Open Collector |
| Pin Count | 10 |
| Power Supplies | 3/5V |
| Number of Channels | 4 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.5V |
| Operating Supply Current | 35μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 1.8V 2.5V 3.3V 5V |
| Number of Voltages Monitored | 4 |
| Reset Timeout | <1ms Minimum |
| Supply Current-Max (Isup) | 0.065mA |
| Undervoltage Threshold | 1.53V |
| Overvoltage Threshold | 1.62V |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
MAX6338JUB Overview
Power management is mounted through 10 terminals. In terms of packaging, power management follows the Tube model. As a reference, this IC management includes 1 functions for your convenience. It is possible to find on this power management a series of 4 channels. Please find attached 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) functions for your reference in this IC power. It is a IC power that shares many benefits with other products from the Multi-Voltage Supervisor line. The package peak reflow temperature is specified to be 245. A supply voltage of 3V is used to conduct the PMIC chip. In a 4 supply voltage, the PMIC chip conducts. Surface Mount mounts IC management. The power management system can be categorized as a Power Management Circuits chip. In total, IC powers are 10 pins on the board. There are 10 pins on the supervisor. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 2.5V, which is the minimum supply voltage that should be applied. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Mounting type Surface Mount is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. In order to maintain a stable supply current for the power management, 35μA is the recommended value. To find similar IC managements from the manufacturer, you can always search by MAX6338. To operate this power management, you will need at least 3/5V volts of power.
MAX6338JUB Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2.5V
35μA operating supply current
MAX6338JUB Applications
There are a lot of Maxim Integrated MAX6338JUB Voltage Supervisors applications.
- Military electronics
- Fire equipment power monitoring system
- Leakage protection
- Set top box
- Radio
- Insulation fault location system
- Important electronics for automotive safety
- Transformer load monitoring equipment
- Unattended substation automation
- Utility meter
