MAX6338LUB+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 444mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX6338 |
| Output | Open Drain or Open Collector |
| Pin Count | 10 |
| Power Supplies | 3/5V |
| Number of Channels | 4 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.5V |
| Operating Supply Current | 35μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.19V 3.08V Adj Adj |
| Number of Voltages Monitored | 4 |
| Reset Timeout | <1ms Minimum |
| Supply Current-Max (Isup) | 0.065mA |
| Undervoltage Threshold | 2.13V |
| Overvoltage Threshold | 2.25V |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6338LUB+T Overview
This voltage supervisor has a total of 10 mounting terminals that can be used for mounting. Packaged in the form of a Tape & Reel (TR), power management is easy to use. To assist you, this IC power includes 1 functions. A series of 4 channels can be found on this supervisor. Please refer to power management for 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) functions. Several of the benefits of this PMIC are also shared by other Multi-Voltage Supervisor products. IC management is specified that the package peak reflow temperature should be 260. In a 3V supply voltage, the power management conducts. A supply voltage of 4 is used to conduct the PMIC chip. By Surface Mount, IC management has been mounted. There is a subcategory called Power Management Circuits for this power management. There are a total of 10 pins on power management. 10 pins make up the power management. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 2.5V, which is the minimum supply voltage that should be applied. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. The mounting type of the supervisors is Surface MountIt is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. The supervisor's supply current is specified to 35μA. For similar manage ics search of the manufacturer, you can always refer to MAX6338, the base PMIC number. It is necessary to have 3/5V volts of power in order for this voltage supervisor to operate.
MAX6338LUB+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2.5V
35μA operating supply current
MAX6338LUB+T Applications
There are a lot of Maxim Integrated MAX6338LUB+T Voltage Supervisors applications.
- Electric heating appliances
- Functional modules
- Kitchen appliances
- Network equipment
- Microcontroller system
- Power distribution systems of operating room
- Digitally controlled LDO regulators circuit
- Efficient information transmission
- Automotive power systems
- Urban rail transit weak current power monitoring
