MAX6338MUB+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 444mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX6338 |
| Output | Open Drain or Open Collector |
| Pin Count | 10 |
| Power Supplies | 3/5V |
| Number of Channels | 4 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.5V |
| Operating Supply Current | 35μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.63V 4.38V Adj -4.38V |
| Number of Voltages Monitored | 4 |
| Reset Timeout | <1ms Minimum |
| Supply Current-Max (Isup) | 0.065mA |
| Undervoltage Threshold | 2.55V |
| Overvoltage Threshold | 2.7V |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6338MUB+T Overview
This power management consists of 10 mounting terminals on which it can be mounted. There is a Tape & Reel (TR)-packaging method applied to IC management. To assist you, this IC power includes 1 functions. Power management consists of 4 channels, each of which can be used independently. In this PMIC, you can find 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) functions for your reference. There are a number of benefits that this PMIC has in common with other Multi-Voltage Supervisor manage ics. Packages are specified to have an average peak reflow temperature of 260. IC management conducts in a 3V-voltage supply. Power management conducts at a voltage of 4. The power management is mounted by Surface Mount. There is a subcategory called Power Management Circuits for this power management. In total, it has 10 pins on IC management. There are 10 pins on the supervisor. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 2.5V. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. A Surface Mount mounting type is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. There is a 35μA supply current present in the power management. You can always use MAX6338, the base supervisor number, to search for similar PMICs of the manufacturer. The voltage supervisor requires a power source of 3/5V volts in order to work correctly.
MAX6338MUB+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2.5V
35μA operating supply current
MAX6338MUB+T Applications
There are a lot of Maxim Integrated MAX6338MUB+T Voltage Supervisors applications.
- emergency room
- Medical-specific isolation transformer
- Functional modules
- Low voltage/high power - AI, GPU
- Battery cars
- Set top box
- Detection of phase loss
- Transformer load monitoring equipment
- Computer applications
- Important electronics for automotive protection
