MAX6338OUB+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 444mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX6338 |
| Output | Open Drain or Open Collector |
| Pin Count | 10 |
| Power Supplies | 3/5V |
| Number of Channels | 4 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.5V |
| Operating Supply Current | 35μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.93V 4.38V Adj -4.38V |
| Number of Voltages Monitored | 4 |
| Reset Timeout | <1ms Minimum |
| Supply Current-Max (Isup) | 0.065mA |
| Undervoltage Threshold | 2.85V |
| Overvoltage Threshold | 3V |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6338OUB+ Overview
There are 10 terminals connected to this power management, which makes it easy to mount. This power ic is packaged in a way that looks like a Tube. For your reference, this IC power includes a list of 1 functions. This power managment ic consists of 4 channels, each of which can be used independently. In this IC management you will find 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) functions for you to refer to. There are many benefits that this IC power shares with other Multi-Voltage Supervisor products as well. As specified in the package specification, the peak reflow temperature of the package is set at 260. The supervisor is always powered by a 3V volt supply. When 4 is applied to the power ic, it conducts. The mount is attached to Surface Mount. The power management system can be categorized as a Power Management Circuits chip. In total, it has 10 pins on IC management. The pins of the power management system count 10. Supply voltage (Vsup) should be at least 2.5V for this power management. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Surface Mount is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~85°C TA. During operation, this power management system outputs Open Drain or Open Collector. Supplied with a operating current of 35μA, this PMIC is capable of fully function as specified. A similar IC managements number of the manufacturer can always be found by using MAX6338, the base power ics number. This power management requires 3/5V power to work.
MAX6338OUB+ Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2.5V
35μA operating supply current
MAX6338OUB+ Applications
There are a lot of Maxim Integrated MAX6338OUB+ Voltage Supervisors applications.
- Efficient information transmission
- Battery cars
- Leakage protection
- Multi-voltage system
- Smartphones
- Precision measurement
- Power distribution systems of ICU
- Network equipment
- Power distribution systems of operating room
- Stable power system
