MAX6338PUB
| Parameters | |
|---|---|
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX6338 |
| Output | Open Drain or Open Collector |
| Pin Count | 10 |
| Power Supplies | 3/5V |
| Number of Channels | 4 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.5V |
| Operating Supply Current | 35μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 3.3V 5V Adj -5V |
| Number of Voltages Monitored | 4 |
| Reset Timeout | <1ms Minimum |
| Supply Current-Max (Isup) | 0.065mA |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 3.15V |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 444mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
MAX6338PUB Overview
A total of 10 terminals are used to mount this power management. Packaging is in the form of a Tube. Power management is possible to find a series of 1 functions. This power managment ic consists of 4 channels, each of which can be used independently. There are 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) functions included in this PMIC so that you can refer to them. There are many benefits that this IC power shares with other Multi-Voltage Supervisor products as well. Packages are specified to have an average peak reflow temperature of 245. IC management conducts at a voltage of 3V. During operation, the power ic is supplied with a voltage of 4. The mount is attached to Surface Mount. The power management belongs to the Power Management Circuits subcategory. Power management has a total of 10 pins. 10 pins make up the power management. There should be a minimum voltage supply (Vsup) of 2.5V for this PMIC. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The mounting type of the supervisors is Surface MountThe temperature of the supervisors should be set to this range: -40°C~85°C TA. Power management has an output of Open Drain or Open Collector during operation. The supply current of the power management is 35μA. For similar manage ics search of the manufacturer, you can always refer to MAX6338, the base PMIC number. There is a requirement for 3/5V power to power this power management.
MAX6338PUB Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2.5V
35μA operating supply current
MAX6338PUB Applications
There are a lot of Maxim Integrated MAX6338PUB Voltage Supervisors applications.
- Automotive permanent magnet synchronous motors
- Telecommunications equipment
- Functional modules
- Insulation fault location system
- Embedded computing
- Electronics installed in the vehicle
- Dash board
- Digitally controlled LDO regulators circuit
- Urban rail transit weak current power monitoring
- Radar
