MAX6338PUB+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 444mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX6338 |
| Output | Open Drain or Open Collector |
| Pin Count | 10 |
| Power Supplies | 3/5V |
| Number of Channels | 4 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.5V |
| Operating Supply Current | 35μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 3.08V 4.63V Adj -4.63V |
| Number of Voltages Monitored | 4 |
| Reset Timeout | <1ms Minimum |
| Supply Current-Max (Isup) | 0.065mA |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 3.15V |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6338PUB+T Overview
There are 10 terminals on this power management that allow it to be mounted. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. In this PMIC, you can find 1 functions for your reference. Power management consists of 4 channels, each of which can be used independently. Please find attached 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) functions for your reference in this IC power. There are many benefits that this IC power shares with other Multi-Voltage Supervisor products as well. There is a specification for the peak reflow temperature of the package to be 260. IC management conducts at a voltage of 3V. IC management conducts in a 4-voltage supply. Surface Mount is the one that mounts power management. This power ic can be sub-categorized as Power Management Circuits. The total number of pins on this power management is 10. Pin count of the power management is 10. A voltage (Vsup) that doesn't fall below 2.5V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Mounting type Surface Mount is recommended. Temperature setting for the supervisors should be -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. In order to maintain a stable supply current for the power management, 35μA is the recommended value. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6338, which is the base power ics number. In order to operate this power management, it requires 3/5V volts of power.
MAX6338PUB+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 2.5V
35μA operating supply current
MAX6338PUB+T Applications
There are a lot of Maxim Integrated MAX6338PUB+T Voltage Supervisors applications.
- Urban rail transit weak current power monitoring
- Efficient information transmission
- Medical-specific insulation monitor
- Sensitive sensors
- Power distribution systems of ICU
- Power distribution systems of CCU
- Detection of phase imbalance
- Network equipment
- DSP
- Smart meter
