MAX6347UR46+T
| Parameters | |
|---|---|
| Max Power Dissipation | 320mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.95mm |
| Base Part Number | MAX6347 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 500nA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | 4.63V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 100ms Minimum |
| Min Reset Threshold Voltage | 4.56V |
| Max Reset Threshold Voltage | 4.699V |
| Threshold Voltage | +4.63V |
| Undervoltage Threshold | 4.56V |
| Overvoltage Threshold | 4.699V |
| Length | 2.92mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
MAX6347UR46+T Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. Please find attached 1 functions for your reference in this IC power. There are 1 channels on this power managment ic that can be found in a series. IC management is packaged as a TO-236-3, SC-59, SOT-23-3 package. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. A supply voltage of 3V is used to conduct the PMIC chip. When 1 is applied to the power ic, it conducts. The power management is mounted by Surface Mount. There is a subcategory of this power ic known as Power Management Circuits. It has a total of 3 pins that are attached to IC management. This power management has 3 pins. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.2V, which is the minimum supply voltage that should be applied. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. The supervisor's supply current is specified to 500nA. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6347, which is the base power ics number.
MAX6347UR46+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
500nA operating supply current
MAX6347UR46+T Applications
There are a lot of Maxim Integrated MAX6347UR46+T Voltage Supervisors applications.
- Microprocessor system
- Important electronics for automotive safety
- Rechargeable batteries
- Cloud computing
- Digitally controlled LDO regulators circuit
- Refrigeration
- Microcontroller system
- Detection of phase sequence
- Power distribution systems of operating room
- Utility meter
