MAX6361LUT26+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | MANUAL RESET INPUT, WATCHDOG INPUT |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 696mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.38V |
| Terminal Pitch | 0.95mm |
| Base Part Number | MAX6361 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 6 |
| Power Supplies | 2.5/5V |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 15μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.63V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 150ms Minimum |
| Supply Current-Max (Isup) | 0.05mA |
| Min Reset Threshold Voltage | 2.55V |
| Max Reset Threshold Voltage | 2.7V |
| Undervoltage Threshold | 2.55V |
| Overvoltage Threshold | 2.7V |
| Length | 2.9mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6361LUT26+T Overview
This voltage supervisor has a total of 6 mounting terminals that can be used for mounting. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. Power management is possible to find a series of 1 functions. Power management consists of 2 channels, each of which can be used independently. IC management is packaged as a SOT-23-6 package. As with other Battery Backup Circuit products, this IC management also offers a wide range of benefits. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. There is a voltage supply of 2.38V for the PMIC chip, and the chip conducts at that voltage. When 1 is applied to the power ic, it conducts. The power management is mounted by Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. 6 pins are present in total in this power management. Pin count of the power management is 6. A voltage (Vsup) that doesn't fall below 0V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Surface Mount is the recommended mounting type. This range of temperature should be set for the supervisors: -40°C~85°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. There is a 15μA supply current present in the power management. Additionally, there are many other features that can be found inside of the power management, such as [0]. For similar manage ics search of the manufacturer, you can always refer to MAX6361, the base PMIC number. There is a requirement for 2.5/5V power to power this power management.
MAX6361LUT26+T Features
Battery Backup Circuit type
Minimum supply voltage of 0V
15μA operating supply current
MAX6361LUT26+T Applications
There are a lot of Maxim Integrated MAX6361LUT26+T Voltage Supervisors applications.
- Leakage protection
- External alarm
- Data storage applications
- Precision measurement
- Kitchen appliances
- Sensitive sensors
- FPGA design
- Medical-specific isolation transformer
- Battery-powered equipment
- Low voltage/high power - AI, GPU
