MAX6361LUT31+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Strip |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | MANUAL RESET INPUT, WATCHDOG INPUT |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 696mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.38V |
| Terminal Pitch | 0.95mm |
| Output | Push-Pull, Totem Pole |
| Pin Count | 6 |
| Power Supplies | 2.5/5V |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 15μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 3.08V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 150ms Minimum |
| Supply Current-Max (Isup) | 0.05mA |
| Min Reset Threshold Voltage | 3V |
| Max Reset Threshold Voltage | 3.15V |
| Undervoltage Threshold | 3V |
| Overvoltage Threshold | 3.15V |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6361LUT31+T Overview
This voltage supervisor has a total of 6 mounting terminals that can be used for mounting. A Strip package is used to package the power management. Power management is possible to find a series of 1 functions. This power managment ic consists of 2 channels, each of which can be used independently. There are SOT-23-6 functions included in this PMIC so that you can refer to them. With power management, you get a lot of benefits that you won't find in other Battery Backup Circuit products. During the reflow process, a peak temperature of 260 is specified for the package. The supervisor is always powered by a 2.38V volt supply. A supply voltage of 1 is used to conduct the PMIC chip. Using Surface Mount, IC management is mounted. This power ic can be sub-categorized as Power Management Circuits. 6 pins are present in total in this power management. Pin count of the power management is 6. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 0V, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Mounting type Surface Mount is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. In order to maintain a stable supply current for the power management, 15μA is the recommended value. Among other features, IC power can be also taken advantage of [0], for instance. A power supply of 2.5/5V watts is required for the operation of this power management.
MAX6361LUT31+T Features
Battery Backup Circuit type
Minimum supply voltage of 0V
15μA operating supply current
MAX6361LUT31+T Applications
There are a lot of Maxim Integrated MAX6361LUT31+T Voltage Supervisors applications.
- Power distribution systems of operating room
- Solar power charger
- Household appliances
- Detection of phase imbalance
- Smartphones
- DSP
- Fire equipment power monitoring system
- WiFi router
- Detection of phase sequence
- Automotive permanent magnet synchronous motors
