MAX6361PUT26+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | MANUAL RESET INPUT, WATCHDOG INPUT |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 696mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.38V |
| Terminal Pitch | 0.95mm |
| Base Part Number | MAX6361 |
| Output | Open Drain or Open Collector |
| Pin Count | 6 |
| Power Supplies | 2.5/5V |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 15μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.63V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 150ms Minimum |
| Supply Current-Max (Isup) | 0.05mA |
| Min Reset Threshold Voltage | 2.55V |
| Max Reset Threshold Voltage | 2.7V |
| Undervoltage Threshold | 2.55V |
| Overvoltage Threshold | 2.7V |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX6361PUT26+T Overview
There are 6 mounting terminals on the voltage supervisor, each of which has a different function. Tape & Reel (TR)-packaging is used. As a reference, this IC management includes 1 functions for your convenience. This power managment ic consists of 2 channels, each of which can be used independently. In this IC management you will find SOT-23-6 functions for you to refer to. There are a lot of similarities between this IC management and other Battery Backup Circuit products. As specified in the package specification, the peak reflow temperature of the package is set at 260. When 2.38V is applied to the power ic, it conducts. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The power management is mounted by a Surface Mount-axis. The power management belongs to the Power Management Circuits subcategory. In total, IC powers are 6 pins on the board. This power management system has 6 pins. It is recommended that Vsup should not be less than 0V for this IC power. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Mounting type Surface Mount is recommended. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. It is estimated that the voltage supervisor's supply current is 15μA. Additionally, there are many other features that can be found inside of the power management, such as [0]. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6361, which is the base power ics number. There is a requirement for 2.5/5V power to power this power management.
MAX6361PUT26+T Features
Battery Backup Circuit type
Minimum supply voltage of 0V
15μA operating supply current
MAX6361PUT26+T Applications
There are a lot of Maxim Integrated MAX6361PUT26+T Voltage Supervisors applications.
- Microcontroller system
- Stable power system
- Unattended substation automation
- Transformer load monitoring equipment
- Power distribution systems of CCU
- WiFi router
- Rechargeable batteries
- Utility meter
- Power distribution systems of infant care room
- Microprocessor system
